You'll need a CICS MCT entry (Monitor control table).
Sample JCL:
//DELIT EXEC PGM=IDCAMS
//SYSIN DD *
DELETE SYS.CICSTS54.CICS.MNDUPREC
SET MAXCC=0
/*
//SYSPRINT DD SYSOUT=A
//MNDUP EXEC PGM=DFHMNDUP
//STEPLIB DD DSN=SYS3.CICSTS54.CICS.SDFHLOAD,DISP=SHR
//SYSUT4 DD DSN=SYS.CICSTS54.CICS.MNDUPREC,DISP=(NEW,CATLG),
// UNIT=SYSDA,SPACE=(TRK,(1,1))
//SYSPRINT DD SYSOUT=A
//SYSUDUMP DD DUMMY
//SYSIN DD *
MCT=WB
SYSID=MVS1
GAPPLID=CICS54T
SAPPLID=CICS54T
DATE=2018316
TIME=000100
//SMFUNLD EXEC PGM=IFASMFDP
//* INDD1 DD DSN=SYS1.MAN1,DISP=SHR,AMP=('BUFSP=65536')
//INDD1 DD DSN=SYS6.SMFDATA.BACKUP(0),DISP=SHR
// DD DSN=SYS6.SMFDATA.BACKUP(-1),DISP=SHR
// DD DSN=SYS6.SMFDATA.BACKUP(-2),DISP=SHR
//OUTDD1 DD DSN=&&TEMP,DISP=(NEW,PASS),SPACE=(CYL,(20,20)),
// UNIT=SYSDA
//SYSPRINT DD SYSOUT=A
//SYSIN DD *
INDD(INDD1,OPTIONS(DUMP))
OUTDD(OUTDD1,TYPE(110(1)))
/*
//*
//DEL2 EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=A
//SYSIN DD *
DELETE USER.DFHMOLS.UNLOAD
SET MAXCC=0
/*
//PRNT EXEC PGM=DFH$MOLS
//STEPLIB DD DSN=SYS1.USER.LOAD,DISP=SHR
// DD DSN=SYS3.CICSTS54.CICS.SDFHLOAD,DISP=SHR
//INPUT DD DSN=SYS.CICSTS54.CICS.MNDUPREC,DISP=SHR
// DD DSN=&&TEMP,DISP=(OLD,DELETE),UNIT=SYSDA
//SYSUT2 DD DSN=&&XPND,DISP=(NEW,PASS),UNIT=SYSDA,
// SPACE=(CYL,(25,10))
//SYSUT4 DD DSN=USER.DFHMOLS.UNLOAD,DISP=(,CATLG),
// UNIT=SYSDA,SPACE=(CYL,(25,10))
//SORTWK01 DD SPACE=(CYL,(5,1)),UNIT=SYSDA
//SORTWK02 DD SPACE=(CYL,(5,1)),UNIT=SYSDA
//SORTWK03 DD SPACE=(CYL,(5,1)),UNIT=SYSDA
//SORTWK04 DD SPACE=(CYL,(5,1)),UNIT=SYSDA
//SORTWK05 DD SPACE=(CYL,(5,1)),UNIT=SYSDA
//SORTDIAG DD SYSOUT=A
//SYSOUT DD SYSOUT=A
//SYSPRINT DD SYSOUT=A
//SYSABEND DD SYSOUT=A
//SYSUDUMP DD SYSOUT=A
//SYSIN DD *
OPTION LOCAL
*
RESOURCE ALL
PRINT ALL
UNLOAD
Sample output lots of fields including USER ID::
********************************* TOP OF DATA
**********************************
*** DFH$MOLS - CICS 7.1.0 - MONITORING DATA LISTING PROGRAM *** DATE
2020
OPTION LOCAL
*
RESOURCE ALL
PRINT ALL
UNLOAD
********************************************************************************
* SMF HEADER * TIME = 0:01:00.00 DATE = 2018/316 SYSTEM-ID
= MV
* * REC TYPE = 110 REC SUBTYPE = 1 NO OF
TRIPLETS = 2
* * PROD SECT OFFSET = 44 PROD SECT LENGTH = 114
NU
* * DATA SECT OFFSET = 158 DATA SECT LENGTH =
10218 NU
********************************************************************************
* SMF PRODUCT SECTION * REC VERSION = 0710 REC MAINT IND = 0 G-APPLID
= CI
* * JOB NAME = ENTRY DATE = 2019/005
ENTRY TI
* * 1ST CONN. OFFSET = 0 CONNECTOR LENGTH = 0
NU
* * 1ST DATA OFFSET = 158 DATA ROW LENGTH = 26
NU
* * COMPRESSED DATA LENGTH = 0
* * LOCAL TIME ZONE = 00000D69 LEAP SECOND OFFSET =
00000
********************************************************************************
FIELD-NAME SIZE CONNECTOR OFFSET NICKNAME NEW
IN-COR
DFHTASK C001 4 X'0001' X'0000' TRAN
DFHTERM C002 4 X'0002' X'0004' TERM
DFHCICS C089 8 X'0003' X'0008' USERID
DFHTASK C004 4 X'0004' X'0010' TTYPE
DFHCICS T005 8 X'0005' X'0014' START
DFHCICS T006 8 X'0006' X'001C' STOP
DFHTASK P031 4 X'0007' X'0024' TRANNUM
DFHTASK A109 4 X'0008' X'0028' TRANPRI
DFHTASK C166 8 X'0009' X'002C' TCLSNAME
DFHTERM C111 8 X'000A' X'0034' LUNAME
DFHPROG C071 8 X'000B' X'003C' PGMNAME
DFHTASK C097 20 X'000C' X'0044' NETUOWPX
DFHTASK C098 8 X'000D' X'0058' NETUOWSX
DFHCICS C130 4 X'000E' X'FFFF' RSYSID
On Wed, May 27, 2020 at 1:46 PM Wayne Bickerdike <[email protected]> wrote:
> CICS SMF 110. You could probably use DFH$MOLS to analyse, it takes some of
> the hard work out of breaking the SMF into readable stuff.
>
> On Wed, May 27, 2020 at 7:13 AM Matthew Stitt <[email protected]>
> wrote:
>
>> CICS statistics. Make sure they are turned on.
>>
>> The CICS statistics are written as SMF 110 records.
>>
>> It is possible to analyze them using various tools.
>>
>> >toot toot> Check CBT file 529. You will also need CBT file 527 for a
>> sub-program or two.
>>
>> Matthew
>>
>> On Tue, 26 May 2020 16:59:28 -0400, Bob Bridges <[email protected]>
>> wrote:
>>
>> >I'm not a CICS jock, but at many of the installations I've worked at
>> I've had occasion to analyze a record of who used which CICS transactions
>> over the past weeks or years. The datasets have had varying formats, but
>> I've gradually come to believe that CICS must track such things and keep a
>> log somewhere. The alternative is to believe that every installation
>> reinvents this useful wheel independently, which I'm inclined to doubt.
>> >
>> >Now I'm at a new place, and the guy I take to be the local CICS sysprog
>> (but I may be mistaken) says he's not aware of such a function. Is this
>> something easy I can point out to him, or am I mistaken about it being a
>> feature available to all CICS installations?
>> >
>> >For that matter, is it something I can maybe find myself, without even
>> bothering him?
>> >
>> >---
>> >Bob Bridges, [email protected], cell 336 382-7313
>> >
>> >/* Be careful of your thoughts; they may become words at any moment.
>> -Ira Gassen */
>> >
>>
>> ----------------------------------------------------------------------
>> For IBM-MAIN subscribe / signoff / archive access instructions,
>> send email to [email protected] with the message: INFO IBM-MAIN
>>
>
>
> --
> Wayne V. Bickerdike
>
>
--
Wayne V. Bickerdike
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
