No problem, Rob. To all,
I changed dispby-112 to service and it worked flawlessly. What changed about dispby-112.boulder.ibm.com to have caused my error? Thanks to everyone that replied. Bob -----Original Message----- From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf Of Jackson, Rob Sent: Friday, December 4, 2020 1:08 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IBM Pardon me, please. Robert, that is, not Richard. First Horizon Bank Mainframe Technical Support -----Original Message----- From: Jackson, Rob Sent: Friday, December 4, 2020 1:06 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: RE: Getting Enhanced HOLDDATA from IBM Richard, Gil is using passive mode; you are using active, and it does look like a data channel issue. Try these in SYSFTPD: FWFRIENDLY TRUE; PASSIVEIGNOREADDR TRUE; EPSV4 TRUE; First Horizon Bank Mainframe Technical Support -----Original Message----- From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf Of Paul Gilmartin Sent: Friday, December 4, 2020 12:54 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IBM [External Email. Exercise caution when clicking links or opening attachments.] On Fri, 4 Dec 2020 17:25:09 +0000, Richards, Robert B. (CTR) wrote: >EZA1736I FTP (EXIT >EZY2640I Using 'SYS1.TCPPARMS(FTPDATA)' for local site configuration >parameters. >EZA1450I IBM FTP CS V2R3 >EZA1772I FTP: EXIT has been set. >EZA1456I Connect to ? >EZA1736I dispby-112.boulder.ibm.com >EZA1554I Connecting to: dispby-112.boulder.ibm.com 170.225.15.112 port: 21. >220-* I used: ftp://service.boulder.ibm.com/s390/holddata/full.txt It seems intermittent. I got some timeouts; the last few times it succeeded. That might mean that it cached enough to work finally. I had no failures with ...service... ... >EZA1736I locsite lrecl=80 blksize=0 recfm=fb cyl primary=15 EZA1460I >Command: >EZA1736I get full.txt 'xxxdsnxxx' (repl EZA1701I >>> PORT >10,1,21,1,112,164 >200 PORT command successful >EZA1701I >>> RETR full.txt >150 Opening ASCII mode data connection for full.txt (16877484 bytes) >EZA2590E recv error from receive_data - EDC8121I CONNECTION RESET. >(errno2=0x74520442) EZA2607W Transfer aborted due to receive error (-1) >EZA2589E Connection to server interrupted or timed out. Initial IPv6 >connection EZA1721W Server not responding, closing connection. >EZA1735I Std Return Code = 16150, Error Code = 00010 -- gil ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
