Classification: Confidential An unresolved ERROR Hold will generate RC=8. To eliminate, exclude to PTF with the error hold. DO NOT bypass error hold without a very good reason and understand the implications if you do.
HTH, -----Original Message----- From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf Of Wayne Bickerdike Sent: Friday, September 3, 2021 10:01 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: SMPe GIM30206E [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.] It's always advisable to read the HOLDDATA, often these are advisory in nature, could be "check region size is a minimum" or "these parameters are now obsolete and will be ignored". If you are happy that you understand the hold reasons, as previous posters said you can BYPASS. On Sat, Sep 4, 2021 at 9:28 AM Retired Mainframer < 000003a485c129c3-dmarc-requ...@listserv.ua.edu> wrote: > At my last site, the Quality Control folks would not accept anything > higher than a four on a job they were required to review. This was a > result of some product teams bamboozling them on 8s and 12s in the > past. Management did not like it when the customers discovered > delivery errors. Once QC was required to review system updates as > part of new security practices, 4 became the limit for SMPE also. > > -----Original Message----- > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On > Behalf Of Mark Jacobs > Sent: Friday, September 3, 2021 10:26 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: SMPe GIM30206E > > Look at the SMP/e CAUSER report and see what is/are the hold reasons. > Then it depends on what they are. Bypass or not. There's no need to > exclude them. > Just > expect an RC=8 on the apply. > > Mark Jacobs > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- Wayne V. Bickerdike ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ::DISCLAIMER:: ________________________________ The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ________________________________ ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
