Logmode is invalid for the physical device, sense 0821 means that the bind was rejected due to having invalid parameters (which come from the logmode entry). You might want to check the PSERVIC value.
On Sun, Dec 12, 2021 at 8:35 PM Alexander Huemer <[email protected]> wrote: > Hi > > This has probably not been done by anybody in 20 years, I'll try my luck > anyways. > I have several physical 3270 displays hooked up to a 3174 that talks > APPN to VTAM. 3179, 3290 and an IRMA board work without any issues. > There is a 3192G (DFT, like the 3290) as well, that doesn't. > The display does show the VTAM logon screen, though upon logon attempt > it errors out. > > The display shows: > > T005 UNABLE TO ESTABLISH SESSION - BIND FAILED WITH SENSE 08210000 > > In the OIA it says: > > X PROG722 > > VTAM says: > > 00 19.01.51 STC00160 IST663I BIND FAIL REQUEST RECEIVED, SENSE=08210000 > > IST664I REAL OLU=MYNETID.T005 REAL DLU=MYNETID.A06TSO01 > > IST889I SID = F4EF78629E2CE0DD > > IST891I MYNETID.P390SSCP.VN3174PU GENERATED FAILURE NOTIFICATION > > IST893I ORIGINAL FAILING REQUEST IS BIND > > IST314I END > > - 19.01.51 STC00161 IKT030I TCAS LOGON PROCESS FAILURE PLU=A06TSO01 > > - SLU=MYNETID.A06TSO01 SENSE= 08210000 > > 19.01.51 IKT117I TSO/VTAM INITIALIZATION FAILED FOR > > APPLNAME=TSO0001 , LUNAME=MYNETID.T005 > > 19.01.51 IKT111I APPLNAME=TSO0001 FAILED DUE TO: TCAS > CLSDST > > PASS FAILURE > > 19.01.51 IKJ608I LOGON TERMINATED, IKTXINIT, TSO/VTAM > > INITIALIZATION ERROR > > 19.01.51 STC00160 IST804I CLOSE IN PROGRESS FOR TSO0001 OPENED BY > > ***NA*** > > 19.01.51 STC00160 IST400I TERMINATION IN PROGRESS FOR APPLID TSO0001 > > 19.01.51 STC00160 IST805I VTAM CLOSE COMPLETE FOR TSO0001 > > IEE612I CN=01 DEVNUM=0700 SYS=P390 > > The LU coding for T005 in VTAM looks like this: > > T005 LU LOCADDR=5,ISTATUS=ACTIVE,DLOGMOD=DYNAMICB,USSTAB=USSS > > I had this previously, to the same effect: > > T005 LU LOCADDR=5,ISTATUS=ACTIVE,DLOGMOD=D4C32XX3,USSTAB=USSS > > I suspect the LU coding is the culprit, maybe DLOGMOD. > Any suggestions appreciated. > > -Alex > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
