Thanks for your reply. We do appear to have a "network" issue. It is strange because we copied the configs from the old machine are moved the cables from the old HMC to the new HMC. One interface work for remote access to the remote HMC. One the other interface, I can ping the remote gateway and the local HMC, but I cannot ping the SEs at the local site so the manual installation does not work.
We certainly could (add do) use the remote access to the local HMC. We want to get the remote HMC working for our DR test. Thanks again. Tony -----Original Message----- From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf Of Radoslaw Skorupka Sent: Friday, August 12, 2022 5:53 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Remote HMC [[ SEI WARNING *** This email was sent from an external source. Do not open attachments or click on links from unknown or suspicious senders. *** ]] Well, as far as I understood you have a problem with connectivity. 1. Check network connectivity, internal firewalls, rules, etc. 2. Use "manual object installation" - remote HMC will NOT discover your CPCs. You have to define it manually, it is not hard. 3. Domain security. Leave default or check it thoroughly. BTW: What do you need actually? I'm asking, because you wrote about remote HMC, but usually users need remote access to (local) HMC. I did use both and I have to admit the functionality available with remote HMC *but not with remote access* to the local HMC is rather rare. In other words: vast majority of features is available though remote access. Last, but not least: remote access to local HMC is much easier to set up. HTH -- Radoslaw Skorupka Lodz, Poland W dniu 11.08.2022 o 17:57, Cieri, Anthony pisze: > Hi List, > > I have a new DR machine (BC15) that we have installed in Austin. The > machine is running and we tested out a DR scenario when we were there. At > that time , we did NOT have our remote HMC installed. A few week later we are > now installing our remote HMC and we are having an issue. The HMC do not seem > to talk to each other. > > We have used the same cables and copied the configurations from the > previous machines. Our remote HMC (Oaks, PA) cannot ping the SEs in Austin, > however the eth1 interface is up and running. > > Has anyone run into this situation?? > Can you suggest any potential solutions?? > > Thanks in advance > Tony > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN