Binyamin, The z/PDT emulator supports 3270E connection to the Linux side of the box. If you have a 3270port statement in your IPL profile, it will specify the local port number that you can use to connect to z/OS via the Linux side of the box. That bypasses TCP/IP altogether. Mine specifies port 3270.
If you define a new session to QWS3270 and specify the name or IP address of the Linux side of the box and a port number of 3270, you can connect (non-securely) to that port and appear as a channel-attached local 3270 to z/OS. Does that method eliminate the problem you are seeing? Mike Shaw MVS/QuickRef Support Group Chicago-Soft, Ltd. On Sun, Oct 9, 2022 at 7:55 AM Binyamin Dissen <[email protected]> wrote: > On Fri, 7 Oct 2022 10:05:13 -0400 Mike Shaw <[email protected]> > wrote: > > :>We use QWS3270 on a z/PDT and we have not seen that problem. Are you > :>running as a locally attached 3270 device address or through TCP/IP > :>remotely? > > TCP/IP, appears to be thru a gateway. > > :>On Fri, Oct 7, 2022, 6:17 AM Binyamin Dissen <[email protected] > > > :>wrote: > > :>> I am having a strange issue running QWS3270 against a zPDT system (two > :>> different systems). The screen goes completely blank after a few > seconds of > :>> inactivity. > > :>> Quick3270 Secure works fine. > > :>> Anyone else run into this? > > -- > Binyamin Dissen <[email protected]> > http://www.dissensoftware.com > > Director, Dissen Software, Bar & Grill - Israel > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
