There are many ERROR holds in the Enhanced Holddata against Function SYSMODs. I believe that this is done when the error is in the function, as opposed to being introduced by a PTF. Perhaps these days it is unusual for a SECINT error to be introduced by a PTF, but if it was, I would expect the SECINT hold to be against that PTF.
-- Tom Marchant On Thu, 19 Jan 2023 21:01:46 -0000, Patrick Loftus <patricklof...@pmlnet.co.uk> wrote: >The holddata for SECINT looks like below. Note the function SYSMOD, not PTF >SYSMOD ID: >++ HOLD (HSMA230) FMID(HSMA230) REASON(BHxxxxx) ERROR DATE(yyddd) > > COMMENT(SMRTDATA(FIX(UIxxxxx) SYMP(B5.9,T5.7) > > CHGDT(yyddd))) CLASS(SECINT). > >++ HOLD (HSMA240) FMID(HSMA240) REASON(CHxxxxx) ERROR DATE(yyddd) > > COMMENT(SMRTDATA(FIX(UIxxxxx) SYMP(B5.9,T5.7) > > CHGDT(yyddd))) CLASS(SECINT). > >++ HOLD (HSMA230) FMID(HSMA230) REASON(BHxxxxx) ERROR DATE(yyddd) > > COMMENT(SMRTDATA(FIX(UIxxxxx) SYMP(B7.5,T7.2) > > CHGDT(yyddd))) CLASS(SECINT). > >++ HOLD (HSMA240) FMID(HSMA240) REASON(CHxxxxx) ERROR DATE(yyddd) > > COMMENT(SMRTDATA(FIX(UIxxxxx) SYMP(B7.5,T7.2) > > CHGDT(yyddd))) CLASS(SECINT). > >++ HOLD (HSMA220) FMID(HSMA220) REASON(AHxxxxx) ERROR DATE(yyddd) > > COMMENT(SMRTDATA(FIX(UIxxxxx) SYMP(B7.5,T7.2) > > CHGDT(yyddd))) CLASS(SECINT). >Etc etc > >This is unlike the normal full holddata, which can be the PTF SYSMOD ID's: >++HOLD(UJ09068) FMID(HBB77B0) REASON(BA64026) ERROR DATE(22314) > > COMMENT(SMRTDATA(CHGDT(221110))) CLASS(PE). > > >The optional SECINT ASSIGNS file, which you don't have to download, look >like this: >++ ASSIGN SOURCEID(SECINT) TO(UIxxxxx). > >++ ASSIGN SOURCEID(SECINT) TO(UIxxxxx). > >++ ASSIGN SOURCEID(SECINT) TO(UIxxxxx). > >++ ASSIGN SOURCEID(SECINT) TO(UIxxxxx). > >++ ASSIGN SOURCEID(SECINT) TO(UJxxxxx). > >++ ASSIGN SOURCEID(SECINT) TO(UJxxxxx). > >++ ASSIGN SOURCEID(SECINT) TO(UJxxxxx). > >++ ASSIGN SOURCEID(SECINT) TO(UJxxxxx). >Etc etc >In the example from Dave Jousma, with the APPLY SOURCEID(SECINT), I believe >this would only work if you've also obtained the ASSIGN file from Resource >Link too. > >When you run the REPORT ERRSYSMODS report, for SECINT HOLD CLASS it will the >"SYSMOD NAME" as the FMID ID, which is different to a "normal" HOLD which >lists the PTF SYSMOD. >Made up example:: >HOLD SYSMOD APAR ---RESOLVING SYSMOD---- HOLD HOLD >FMID NAME NUMBER NAME STATUS RECEIVED CLASS SYMPTOMS >HMJ4102 UW31189 AN80203 UW32213 GOOD YES PE >HSMA230 HSMA230 AHxxxxx UIxxxxx GOOD YES SECINT ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
