> On Wednesday, July 26, 2023 at 10:13:52 AM PDT, Shaffer, Terri wrote:
> not sure if I can change this order of not, because it displays differently
>with just HOMETEST
Take this with a grain of salt because it's been a long time. The order should
not matter in my opinion. z/OS TCP has a lot more features than TCP on other
platforms. Finding the Unix equivalent is often impossible when z/OS does not
have clearly defined terminology. z/OS HOME addresses doc was not clear when I
last looked. My interpretation was that it's the home IP address for a sent TCP
packet. In other words, when the packet is processed at the destination, HOME
is where the response will be sent. I could easily be wrong and you will need
to determine HOME current functionality.
On Wednesday, July 26, 2023 at 10:13:52 AM PDT, Shaffer, Terri
<[email protected]> wrote:
Thanks.
I don't use VIPA here, but I think I am okay, as I did a NETSTAT HOME
And my PRIMARY is designated correctly with the FLG P
EZZ2350I MVS TCP/IP NETSTAT CS V2R5 TCPIP Name: TCPIP 17:09:31
EZZ2700I Home address list:
EZZ2701I Address Link Flg
EZZ2702I ------- ---- ---
EZZ2703I 127.0.0.1 LOOPBACK
EZZ2704I Address Interface Flg
EZZ2704I ------- --------- ---
EZZ2703I 10.5.23.231 OSA0F0QDI P
EZZ2703I 10.5.23.240 OSA180QDI
But not sure if I can change this order of not, because it displays differently
with just HOMETEST
Ms Terri E Shaffer
Senior Systems Engineer,
z/OS Support:
ACIWorldwide - Telecommuter
H(412-766-2697) C(412-519-2592)
[email protected]
-----Original Message-----
From: IBM Mainframe Discussion List <[email protected]> On Behalf Of
Marshall Stone
Sent: Wednesday, July 26, 2023 12:36 PM
To: [email protected]
Subject: Re: TCPIP Device/Link to Interface question???
EXTERNAL EMAIL: Do not click links or open attachments unless you know the
content is safe.
We have a static VIPA first with the same IP as the old HOME IP. Then the rest
of the interfaces: OSA, Hipersockets, VIPA's DVIPA's . Comment out the HOME
statement. Make sure your start statements are correct. The OBEY file the
whole updated profile.
Marshall Stone
Mainframe Engineer, Technical Services
-----Original Message-----
From: IBM Mainframe Discussion List <[email protected]> On Behalf Of
Shaffer, Terri
Sent: Wednesday, July 26, 2023 12:02 PM
To: [email protected]
Subject: TCPIP Device/Link to Interface question???
Hi,
Was wondering if someone could answer a question?
I am converting my DEVICE/LINK statements to INTERFACE in my TCPIP
configuration on my test lpar.
I recycled my TCPIP and everything works, except I tripped an error on my HOME
statement, because I think it uses LINK name, not Interface name?
My PRIMARYINTERFACE is my primary INTERFACE statement , again everything seems
to work.
However, when I did a hometest, it looked okay with my primary IPADDR first,
then Secondary and then loopback address which it should be.
But to stop the error from my HOME link name from occurring, I commented my
HOME statement out.
That fixed my error message, but now LOOPBACK is first, then Primary IPADDRESS
and then Secondary.
So my question is do I need the HOME STATEMENT, or what replaces it, if
anything when using INTERFACE statement?
And/or how do I get the PRIMARY IPADDRESS first again?
Ms Terri E Shaffer
Senior Systems Engineer,
z/OS Support:
ACIWorldwide - Telecommuter
H(412-766-2697) C(412-519-2592)
[email protected]
________________________________
[https://go.aciworldwide.com/rs/030-ROK-804/images/aci-footer.jpg]
<http://www.aciworldwide.com> This email message and any attachments may
contain confidential, proprietary or non-public information. The information is
intended solely for the designated recipient(s). If an addressing or
transmission error has misdirected this email, please notify the sender
immediately and destroy this email. Any review, dissemination, use or reliance
upon this information by unintended recipients is prohibited. Any opinions
expressed in this email are those of the author personally.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
[email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
[email protected] with the message: INFO IBM-MAIN
________________________________
[https://go.aciworldwide.com/rs/030-ROK-804/images/aci-footer.jpg]
<http://www.aciworldwide.com>
This email message and any attachments may contain confidential, proprietary or
non-public information. The information is intended solely for the designated
recipient(s). If an addressing or transmission error has misdirected this
email, please notify the sender immediately and destroy this email. Any review,
dissemination, use or reliance upon this information by unintended recipients
is prohibited. Any opinions expressed in this email are those of the author
personally.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
