From the HCD main menu, select: 1. Define, modify, or view configuration data 3. Processors S to select the processor (not sure you get this if you only have 1 processor defined, I have multiple) S to Work with attached channel paths (for a given channel sub system)
This should bring up a list of CHPs defined in that channel subsystem. This is where you pick a CHP and modify the switch info. Tom Chicklon ZjQcmQRYFpfptBannerEnd I am guessing that it should be in option 3 (processors) but I don't see a way to add a CHP. The zPDT has nothing there at all. This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
