You did misunderstand. I didn’t say that I put it on the SYSRES. I said I maintain a complete SMPE environment that matches each SYSRES.
Dave Jousma Vice President | Director, Technology Engineering From: IBM Mainframe Discussion List <[email protected]> on behalf of Steve Estle <[email protected]> Date: Tuesday, December 10, 2024 at 2:03 PM To: [email protected] <[email protected]> Subject: Re: SMPE and auditors SMPE List Log statement: https://urldefense.com/v3/__https://www.ibm.com/docs/en/zos/2.5.0?topic=syntax-smplog__;!!MwwqYLOC6b6whF7V!nFN6lLPDEzdoz6jP0Ao_cGQUJfiMICFVmrVzFhmkLHxAU6HFwwUR_82GAOSXbfyZlaAcmcdgAEEgkYGAwhdM4c6ZRSA1S9W73KA$<https://urldefense.com/v3/__https:/www.ibm.com/docs/en/zos/2.5.0?topic=syntax-smplog__;!!MwwqYLOC6b6whF7V!nFN6lLPDEzdoz6jP0Ao_cGQUJfiMICFVmrVzFhmkLHxAU6HFwwUR_82GAOSXbfyZlaAcmcdgAEEgkYGAwhdM4c6ZRSA1S9W73KA$> - As I'm sure you know typically there is a separate log for each zone - Global, Target, DLIB Also, not sure if I understood correctly but I never recommend putting SMPE logs (or CSI's) onto sysres volume - usually store those on the same volumes (pool) where your SMPE CSI's exist... As part of sysres cloing process you would then clone your SMPE target zone CSI's, logs, etc. if you do a primary / alternate sysres type of ongoing maintenance process. Certainly super sized logs sounds like way to go. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
