Just curious LOAD EP=TPUT DELETE EP=TPUTT
Best Regards Ituriel do Nascimento Neto z/OS System Programmer Em quinta-feira, 19 de junho de 2025 às 06:57:31 BRT, Joseph Reichman <[email protected]> escreveu: I'm aware this is not the way to do it Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ From: IBM Mainframe Discussion List <[email protected]> on behalf of Binyamin Dissen <[email protected]> Sent: Thursday, June 19, 2025 5:43:06 AM To: [email protected] <[email protected]> Subject: Re: error in post logon exit IKJEFD3 878-18 from MSTJCL >From a brief look at your code it looks like you are trying to set up SVC screening for SVC 93, but you are making a lot of assumptions about the TCB structures and TCB lives. I personally do not know which TCBs will stay around (other than the RCT). Also, be aware that 93 is not only TPUT. On Wed, 18 Jun 2025 23:23:12 -0400 Joseph Reichman <[email protected]> wrote: :>Ok Jon tell me where I made an error :> :>thanks :> :> :>IKJEFLD3 CSECT :>IKJEFLD3 AMODE 31 :>IKJEFLD3 RMODE ANY :> YREGS :>XLNK EQU R14 :>AR0 EQU 0 :>AR1 EQU 1 :>AR2 EQU 2 :>AR3 EQU 3 :>AR4 EQU 4 :>AR5 EQU 5 :>AR6 EQU 6 :>AR7 EQU 7 :>AR8 EQU 8 :>AR9 EQU 9 :>AR10 EQU 10 :>AR11 EQU 11 :>AR12 EQU 12 :>AR13 EQU 13 :>AR14 EQU 14 :>AR15 EQU 15 :> STM R14,R12,12(R13) :> LR R3,R15 :> USING IKJEFLD3,R3 :> LA R0,WS_LEN :> LR R11,R1 :> USING PARMLIST,R11 :> STORAGE OBTAIN,LENGTH=(0),ADDR=(R12),SP=0 :> LR R14,R13 :> LR R13,R12 :> ST R14,4(R13) :>d ===> Scroll ===> CSR :> USING WS_DSECT,R13 :> L R6,0(R11) :> USING PARMENT,R6 :> XR R2,R2 :> TSOIDLP DS 0H :> CLC PARMKEY,=F'0' :> BE BUMP :> CLC PARMKEY,=F'2' FIRST ONE IS TSO ID :> BE GETTSO :> BUMP DS 0H :> L R2,PARMLEN :> LA R6,8(R2,R6) :> B TSOIDLP :> GETTSO DS 0H :> L R2,PARMADR :> XR R7,R7 :> ICM R7,B'0011',0(R2) POINT TO TSO ID :> LA R7,0(R7,R2) :> MVC TSOID,0(R7) :> * :> * :> IPK , GET PSW PROTECT KEY :> ST R2,STORKEY SAVE PK IN R11 :> :> SPKA 0 :> LOAD EP=TPUT :> ICM R1,B'1000',=X'00' :> LR R10,R0 :> :> * :> SLL R1,3 LENGTH OF MODULE :> LR R9,R1 :> :> USING PSA,0 :> L R2,PSATOLD :> USING TCB,R2 :> L R2,TCBJSTCB :>* L R2,TCBBACK :>* :> LA R0,264 :> STORAGE OBTAIN,LENGTH=(0),ADDR=(R5),BNDRY=DBLWD,SP=253,TCBADDRX :> =(R2) :> ST R5,SP253 :>* :> STORAGE OBTAIN,LENGTH=(R9),ADDR=(R5),BNDRY=DBLWD,SP=253,LOC=24X :> ,TCBADDR=(R2) :> ST R5,BELOW :> L R4,SP253 :> LA R5,264 :> XR R14,R14 :> LA R14,=X'00' :> XR R15,R15 :> MVCL R4,R14 :>* * :> * MOVE CODE :> * :> L R4,BELOW :> LR R5,R9 :> LR R14,R10 :> LR R15,R5 :> MVCL R4,R14 :> * :> L R5,SP253 :> * :> DELETE EP=TPUTT :> * :> L R4,BELOW :> ST R4,0(R5) :> * :> MVI 4(R5),X'C0' :> :>* :> LA R8,8(R5) :> * :> LA R1,256 :> INITLOOP DS 0H :> MVI 0(R8),X'80' INITIALIZE TO DO NOT INTERCEPT :> LA R8,1(,R8) NEXT BYTE :> BCT R1,INITLOOP LOOP BACK :> * :> LA R8,8(R5) :> MVI 93(R8),X'00' :> * :> * :> ST R5,TCBSVCA2 STORE SCREEN TABLE ADDRESS INTO TCB :> OI TCBFLGS7,TCBSVCS+TCBSVCSP :> * :> L R10,STORKEY :> SPKA 0(R10) :>* :> LA R0,WS_LEN :> LR R12,R13 :> L R13,4(,R13) :> STORAGE RELEASE,LENGTH=(0),ADDR=(R12),SP=0 :> LM R14,R12,12(R13) :> XR R15,R15 :> BR R14 :>PARMENT DSECT :>PARMKEY DS F * PARAMETER KEY :>PARMLEN DS F * PARAMETER LENGTH :>PARMADR DS A * PARAMETER ADDRESS :> COPY DBGRLIT :>WS_DSECT DSECT :> DS 18F :>TSOID DS XL5 :>SP253 DS F :>BELOW DS F :>STORKEY DS F :>DBGRBUF DS XL(DIE_LEN) :>WS_LEN EQU *-WS_DSECT :> DBGRPY :> IKJPTP :> IKJTCB DSECT=YES,LIST=NO :> IHARB :> IHAPSA :> CVT LIST=YES,DSECT=YES :> END :> :> :> :> :>-----Original Message----- :>From: IBM Mainframe Discussion List <[email protected]> On Behalf Of Jon Perryman :>Sent: Wednesday, June 18, 2025 9:33 PM :>To: [email protected] :>Subject: Re: error in post logon exit IKJEFD3 878-18 from MSTJCL :> :>On Wed, 18 Jun 2025 18:27:59 -0400, Joseph Reichman <[email protected]> wrote: :> :>>I copied the basic code from xephon :>> :>>In that code there was a storage obtain and release sp=0 local storage :> :>When you say "release sp=0", then you are saying free the entire subpool and ADDR= & LENGTH= were not specified on the STORAGE RELEASE. Because it was XEPHON, that ADDR= was specified. :> :>If you don't believe me about S0C4 suppression, then issue SLIP SET,ID=S0C4TEST,COMP=0C4,MATCHLIM=5,ACTION=NONE,END and it should only take a couple of minutes on an active system to trip 5 times but without a visible S0C4 abend. :> :>I'm telling you the STORAGE RELEASE has a bad address. Without more information, we can't be helpful. My recommendation is to set a SLIP COMP=878,ACTION=SVCD and look at the dump. :> :>Your code changed something incorrectly. IKJEFLD3 is an exit that is called by TSO and TSO did not like something your code changed. For us to help, providing source code is the only option left. :> :>---------------------------------------------------------------------- :>For IBM-MAIN subscribe / signoff / archive access instructions, :>send email to [email protected] with the message: INFO IBM-MAIN :> :>---------------------------------------------------------------------- :>For IBM-MAIN subscribe / signoff / archive access instructions, :>send email to [email protected] with the message: INFO IBM-MAIN -- Binyamin Dissen <[email protected]> http://www.dissensoftware.com Director, Dissen Software, Bar & Grill - Israel ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
