A site command table that "overrides" the standard START command ? (Or a user command table.)
Best Regards, Thomas Berg ___________________________________________________________________ Thomas Berg Specialist zOS/RQM/IT Delivery Swedbank AB (Publ) > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] > On Behalf Of Peter Hunkeler > Sent: Wednesday, April 09, 2014 6:01 PM > To: [email protected] > Subject: AW: Re: ISPF START command remains on the command line > > Spontaneously I would suspect a bad coded ISPF panel (the one the "START" I > left/reoccurring on). > This is a thought that I had too, but it happens on any panel. I doubt all of > the > panels have been adversely changed. > > > and review these: > > COMMAND_LINE_PLACEMENT > RESET_COMMAND_LINE_PLACEMENT > Not sure I understand what this has to do with my problem. Its not where the > command line is, but that the command line does not get cleared. > > Anyway, thanks for the ideas. > -- > Peter Hunkeler > > > Von: Elardus Engelbrecht <[email protected]> An: > [email protected] Betreff: Re: ISPF START command remains on the > command line Datum: 09.04.14 15:30 > > > Thomas Berg wrote: > > >Spontaneously I would suspect a bad coded ISPF panel (the one the "START" I > left/reoccurring on). > > Indeed. Or look at 'ISPF Settings and Options' dialog. If the command line > still > stays there, have a look at ISPCCONF > > and review these: > > COMMAND_LINE_PLACEMENT > RESET_COMMAND_LINE_PLACEMENT > > HTH! > > Groete / Greetings > Elardus Engelbrecht > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
