>From a VTAM logon screen, this works for any screen size you can implement in
>your emulator, though I believe there is a limitation of maximum bytes per
>screen = 8192 (60 x 132 = 8184 bytes):
logon applid=TSO,logmode=D4C32XX3
That logmode is supplied by IBM by default unless your VTAM network
administrator has deleted it.
If you have Netview Access or some other terminal distributor or interface this
logmode may or may not be available to you. I only know that it works from a
VTAM logon screen.
Can't help with your Attachmate issue though, sorry.
HTH
Peter
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf
Of George, William@FTB
Sent: Friday, April 11, 2014 12:42 PM
To: [email protected]
Subject: Re: Emulator Screen Size with Attachmate Extra X-treme 9.3
Not real sure what you're asking so I'll go with;
The emulator offers the base models of: Model 2 (24X80) Model 3 (32x80),
Model 4 (43X 80) and Model 5 (27x132).
As far as my site? We are on z/OS 01.13.00 (ISPF 6.3), VTAM 6.1.D so whatever
these offer unless there is some system configuration member that limits modes.
I understand there is a LOGMOD that allows for dynamic screen sizes but the
emulator needs to be able to communicate with it. I do recall in the past
successfully logging on with that mode (which escapes me at the moment) but the
emulator could not set any screen size other than the base ones shown above.
This is outside my knowledge base but I have seen old posts on how to do it
with other emulators but it seems Attachmate's Extra! X-treme does not have
this ability as far as I can find. This is why I'm asking and hoping someone
has found a means to do this.
Thanks
Bill
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf
Of Mike Schwab
Sent: Friday, April 11, 2014 9:22 AM
To: [email protected]
Subject: Re: Emulator Screen Size with Attachmate Extra X-treme 9.3
What modes are available at the site you are trying to connect to?
On Fri, Apr 11, 2014 at 10:32 AM, George, William@FTB <[email protected]>
wrote:
> Is anyone aware of a means to configure Attachmate's Extra X-treme (v9.3)
> emulator to display a screen size other than the base models (2,3,4,5)?
> Checking the help and the Attachmate site I've not found any hints on this.
> I was hoping there might be a config member that might allow tweaking beyond
> what is offered on the base "Display" setup screen of the four base models.
> Note: I'm aware of other emulators that are quite flexible is screen size
> configuration and would LOVE to be able to install such however we are locked
> into using what is given us and app installs are shut off.
>
> Thanks
> Bill
>
--
This message and any attachments are intended only for the use of the addressee
and may contain information that is privileged and confidential. If the reader
of the message is not the intended recipient or an authorized representative of
the intended recipient, you are hereby notified that any dissemination of this
communication is strictly prohibited. If you have received this communication
in error, please notify us immediately by e-mail and delete the message and any
attachments from your system.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
