For such, I would suggest looking at the name/token services. You can assign a name/token either: (1) image-wide (APF auth needed); (2) per address space (home or primary); or (3) per TCB. Of course, they you do need to come up with a unique, 16 byte (better - octet), name. I no longer see any desirability to using ASCBUSER or TCBUSER for anything. Mainly because of the possibility of two separate users wanting to use them.
On Thu, May 29, 2014 at 10:33 AM, Ed Jaffe <[email protected]> wrote: > On 5/29/2014 7:12 AM, Micheal Butz wrote: > >> The installation exit guide says that CSVLLIX1 get control under any task >> that issues a link load attach or XCTL >> Does that mean I can communicate with the exit via TCBUSER using PSATOLD >> as the TCB >> > > If you're writing this for in-house use only, TCBUSER is fair game if it's > not currently being used by any other in-house-written code. > > If you're writing this for distribution into the field, then TCBUSER is > off the table entirely. It's not your field to use. > > -- > Edward E Jaffe > Phoenix Software International, Inc > 831 Parkview Drive North > El Segundo, CA 90245 > http://www.phoenixsoftware.com/ > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > -- There is nothing more pleasant than traveling and meeting new people! Genghis Khan Maranatha! <>< John McKown ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
