I have observed that it's not the same TCB Thanks for your help I think can communicate to CSVLLIX1 via the param field on the CSVDYNEX macro On the add option
Thanks again Sent from my iPhone > On May 29, 2014, at 12:06 PM, John McKown <john.archie.mck...@gmail.com> > wrote: > > For such, I would suggest looking at the name/token services. You can > assign a name/token either: (1) image-wide (APF auth needed); (2) per > address space (home or primary); or (3) per TCB. Of course, they you do > need to come up with a unique, 16 byte (better - octet), name. I no longer > see any desirability to using ASCBUSER or TCBUSER for anything. Mainly > because of the possibility of two separate users wanting to use them. > > > On Thu, May 29, 2014 at 10:33 AM, Ed Jaffe <edja...@phoenixsoftware.com> > wrote: > >>> On 5/29/2014 7:12 AM, Micheal Butz wrote: >>> >>> The installation exit guide says that CSVLLIX1 get control under any task >>> that issues a link load attach or XCTL >>> Does that mean I can communicate with the exit via TCBUSER using PSATOLD >>> as the TCB >> >> If you're writing this for in-house use only, TCBUSER is fair game if it's >> not currently being used by any other in-house-written code. >> >> If you're writing this for distribution into the field, then TCBUSER is >> off the table entirely. It's not your field to use. >> >> -- >> Edward E Jaffe >> Phoenix Software International, Inc >> 831 Parkview Drive North >> El Segundo, CA 90245 >> http://www.phoenixsoftware.com/ >> >> ---------------------------------------------------------------------- >> For IBM-MAIN subscribe / signoff / archive access instructions, >> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > -- > There is nothing more pleasant than traveling and meeting new people! > Genghis Khan > > Maranatha! <>< > John McKown > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
