Oh, dear... the phantom CR-deleter strikes again!
Trying once more, laboriously inserting a CR at the end of every line...
/* ***************************************************************** */
/* 'SETSYS' COMMANDS FOR CONTROLLING HSM */
/* ORIGINAL COMMAND LIST CREATED AS PART OF HSM INSTALL, THEN */
/* COPIED HERE AND MODIFIED TO SUIT SITE-SPECIFIC PURPOSES. */
/* */
/* SUBSEQUENT CHANGE HISTORY */
/* 24AUG15 JAC MODIFIED CDSVERSIONBACKUP BACKUPCOPIES FROM 4 DOWN */
/* TO 3 */
/* MODIFIED CDSVERSIONBACKUP BACKUPDEVICECATEGORY FROM */
/* TAPE TO DASD */
/* ***************************************************************** */
AUTH ADJC DATABASEAUTHORITY(CONTROL)
SETSYS JES2
SETSYS NOCONVERSION
SETSYS NOREQUEST
SETSYS NODEBUG
SETSYS NOSWAP
SETSYS DFHSMDATASETSERIALIZATION
SETSYS OPTIMUMDASDBLOCKING
SETSYS USECYLINDERMANAGEDSPACE(N)
SETSYS JOURNAL(RECOVERY)
SETSYS SMF(240)
SETSYS SYSOUT(* 1)
SETSYS SYS1DUMP
SETSYS ACTLOGMSGLVL(FULL)
SETSYS ACTLOGTYPE(SYSOUT(K))
SETSYS MONITOR(STARTUP NOVOLUME)
SETSYS MONITOR(NOSPACE JOURNAL(80))
SETSYS CSALIMITS(MWE(4))
SETSYS CSALIMITS(MAXIMUM(100) ACTIVE(90) INACTIVE(30))
SETSYS EXTENDEDTTOC(N)
SETSYS TAPEHARDWARECOMPACT
SETSYS PARTIALTAPE(BACKUP(REUSE) MIGRATION(REUSE))
SETSYS INPUTTAPEALLOCATION(NOWAIT) OUTPUTTAPEALLOCATION(NOWAIT) -
RECYCLETAPEALLOCATION(NOWAIT)
SETSYS SELECTVOLUME(BACKUP(SCRATCH) MIGRATION(SCRATCH) -
DUMP(SCRATCH))
SETSYS RECYCLEPERCENT(20)
SETSYS NOUSERUNITTABLE
SETSYS TAPEUTILIZATION(UNITTYPE(3590-1) PERCENTFUL(97))
SETSYS TAPESPANSIZE(100)
SETSYS TAPEDELETION(BACKUP(SCRATCHTAPE) MIGRATION(SCRATCHTAPE) -
DUMP(SCRATCHTAPE))
SETSYS MOUNTWAITTIME(10)
SETSYS UNITNAME(3590-1)
SETSYS TAPEINPUTPROMPT(MIGRATIONTAPES(YES))
SETSYS TAPEINPUTPROMPT(BACKUPTAPES(YES))
SETSYS TAPEINPUTPROMPT(DUMPTAPES(YES))
SETSYS DUPLEX(BACKUP(Y) MIGRATION(Y ERRORALTERNATE(CONTINUE)))
SETSYS ML2PARTIALSNOTASSOCIATEDGOAL(10)
SETSYS CDSVERSIONBACKUP(BACKUPCOPIES(3) BACKUPDEVICECATEGORY(DASD) -
DATAMOVER(DSS))
SETSYS NORACFIND
SETSYS TAPESECURITY(RACF)
SETSYS NOERASEONSCRATCH
SETSYS PROFILEBACKUP
SETSYS COMPACT(DASDMIGRATE)
SETSYS COMPACTPERCENT(20)
SETSYS OBJECTNAMES(OBJ,OBJECT,LOAD,LOADLIB,LOADMODS,LINKLIB) -
SOURCENAMES(ASM,COBOL,FORT,PLI,SOURCE,SRC,SRCLIB,SRCE,CNTL,JCL)
SETSYS TAPEMIGRATION(NONE)
SETSYS PRIMARYSPMGMTSTART(0000 0000)
DEFINE PRIMARYSPMGMTCYCLE(YYYYYYY CYCLESTARTDATE(1998/03/02))
SETSYS DAYS(10)
SETSYS MIGRATEPREFIX(HSM)
SETSYS INTERVALMIGRATION
SETSYS ONDEMANDMIGRATION(Y)
SETSYS ODMNOTIFICATIONLIMIT(250)
SETSYS SECONDARYSPMGMTSTART(0000)
DEFINE SECONDARYSPMGMTCYCLE(YYYYYYY CYCLESTARTDATE(1998/03/02))
SETSYS MIGRATIONCLEANUPDAYS(10 30 3)
SETSYS MIGRATIONLEVEL1DAYS(45)
SETSYS MAXEXTENTS(10)
SETSYS MAXRECALLTASKS(8)
SETSYS RECALL(PRIVATEVOLUME(LIKE))
SETSYS SCRATCHFREQUENCY(7) EXPIREDDATASETS(NOSCRATCH)
SETSYS NOSMALLDATASETPACKING
SETSYS MAXMIGRATIONTASKS(3)
SETSYS MAXSSMTASKS(CLEANUP(2) TAPEMOVEMENT(1))
ONLYIF HSMHOST(1)
DEFINE BACKUP(Y 1 CYCLESTARTDATE(1998/03/02))
SETSYS DSBACKUP(DASDSELECTIONSIZE(3000 250) DASD(TASKS(2)) -
TAPE(TASKS(2) DEMOUNTDELAY(MINUTES(60) MAXIDLETASKS(0))))
SETSYS BACKUP
ONLYIF HSMHOST(1)
SETSYS AUTOBACKUPSTART(0000 0000 0000)
SETSYS BACKUPPREFIX(HSM)
SETSYS VERSIONS(1) FREQUENCY(0)
SETSYS MAXBACKUPTASKS(3) NOSKIPABPRIMARY
SETSYS MAXDSRECOVERTASKS(3)
SETSYS SPILL
SETSYS INCREMENTALBACKUP(ORIGINAL)
SETSYS DSBACKUP (GENVSAMCOMPNAMES(YES))
ONLYIF HSMHOST(1)
DEFINE DUMPCYCLE(NNNNNNY CYCLESTARTDATE(1998/03/02))
DEFINE DUMPCLASS(SUNDAY DAY(7) RETPD(27) AUTOREUSE NORESET -
DATASETRESTORE VTOCCOPIES(4))
DEFINE DUMPCLASS(QUARTERS FREQUENCY(90) RETPD(356) NOAUTOREUSE -
NODATASETRESTORE NORESET DISPOSITION('OFF-SITE') VTOCCOPIES(0))
SETSYS AUTODUMPSTART(0000 0000 0000)
SETSYS DUMPIO(3,2)
SETSYS MAXDUMPTASKS(3)
SETSYS ARECOVERUNITNAME(3590-1)
SETSYS MAXABARSADDRESSSPACE(1)
SETSYS ABARSPROCNAME(DFHSMABR)
SETSYS ABARSACTLOGTYPE(SYSOUT(K))
SETSYS ABARSACTLOGMSGLVL(FULL)
SETSYS ARECOVERML2UNIT(3590-1)
SETSYS ARECOVERPERCENTUTILIZED(090)
SETSYS ABARSUNITNAME(3590-1)
SETSYS ABARSBUFFERS(2)
SETSYS ABARSTAPES(STACK)
SETSYS ABARSDELETEACTIVITY(N)
SETSYS ABARSOPTIMIZE(3)
SETSYS ARECOVERTGTGDS(SOURCE)
SETSYS ABARSVOLCOUNT(ANY)
SETSYS PLEXNAME(PLEX0)
SETSYS PROMOTE(PRIMARYHOST(NO) SSM(NO))
ADDVOL HSM100 UNIT(3390) MIGRATION(MIGRATIONLEVEL1 -
NOSMALLDATASETPACKING) THRESHOLD(90)
ADDVOL HSM101 UNIT(3390) MIGRATION(MIGRATIONLEVEL1 -
NOSMALLDATASETPACKING) THRESHOLD(90)
ADDVOL HSM102 UNIT(3390) MIGRATION(MIGRATIONLEVEL1 -
NOSMALLDATASETPACKING) THRESHOLD(90)
ADDVOL HSM103 UNIT(3390) MIGRATION(MIGRATIONLEVEL1 -
NOSMALLDATASETPACKING) THRESHOLD(90)
ADDVOL HSM104 UNIT(3390) MIGRATION(MIGRATIONLEVEL1 -
NOSMALLDATASETPACKING) THRESHOLD(90)
ADDVOL HSM105 UNIT(3390) MIGRATION(MIGRATIONLEVEL1 -
NOSMALLDATASETPACKING) THRESHOLD(90)
ADDVOL HSM106 UNIT(3390) MIGRATION(MIGRATIONLEVEL1 -
NOSMALLDATASETPACKING) THRESHOLD(90)
ADDVOL HSM107 UNIT(3390) MIGRATION(MIGRATIONLEVEL1 -
NOSMALLDATASETPACKING) THRESHOLD(90)
ADDVOL HSM200 UNIT(3390) MIGRATION(MIGRATIONLEVEL2)
ADDVOL HSM201 UNIT(3390) MIGRATION(MIGRATIONLEVEL2)
ADDVOL HSM202 UNIT(3390) MIGRATION(MIGRATIONLEVEL2)
ADDVOL HSM203 UNIT(3390) MIGRATION(MIGRATIONLEVEL2)
ADDVOL HSM204 UNIT(3390) MIGRATION(MIGRATIONLEVEL2)
ADDVOL HSM205 UNIT(3390) MIGRATION(MIGRATIONLEVEL2)
ADDVOL HSM206 UNIT(3390) MIGRATION(MIGRATIONLEVEL2)
John
On Tue, Aug 25, 2015 at 12:48 PM, Mike Schwab <[email protected]>
wrote:
> ML2 was designed for tape, and keeps track of which tapes are full.
> Once they are full, you have to recycle them to write on them.
> Perhaps they haven't modified this tracking for ML2 disk.
>
>
> http://www-01.ibm.com/support/knowledgecenter/SSLTBW_2.1.0/com.ibm.zos.v2r1.arcf000/s4316.htm
> Try HSEND LIST ML2 ODS('hlq.system.hsend.list.ml2')
> Not sure if that lists the volume status.
>
> On Tue, Aug 25, 2015 at 4:00 AM, John Compton <[email protected]>
> wrote:
> > Hello.
> >
> > I'm taking my first faltering steps with DFSMSHSM, and have hit a
> situation that I don't understand.
> > (I've checked around but have been unable to locate an HSM-specific
> mailing list, so I'm putting my query here in the hope that someone can
> provide some guidance.)
> >
> > The situation is that migration to ML2 has stopped working.
> > I've got 8x3390 disks in use for L1, and a further 7 for L2 (as opposed
> to tape).
> > Using 'On demand' migration, I have been able to migrate files from L0
> to L1 and then on to L2, and also from L0 directly to L2. In order to
> understand how to handle ML1 and ML2 space shortages, I deliberately forced
> files to ML2 such that all 7 volumes became full. I then successfully
> recalled the files back to L0. The ML2 disks are now all currently 100%
> free (save for space used by VTOC, etc.)
> >
> > Now, when I try to send anything to L2, I see msg ARC0560E MIGRATION
> LIMITED: NO MIGRATION LEVEL 2 DASD VOLUME AVAILABLE. Any requests I make
> that are directed at L2 simply get queued.
> >
> > I've tried using DELVOL and ADDVOL commands for the disks, but that has
> not shifted the problem.
> > I've looked at using the RECYCLE command, but it doesn't make sense to
> me (I can see why you'd use RECYCLE with tape-based ML2, but not with
> disks...)
> >
> > It is almost certain I've got one or more of the SETSYS parameter values
> in conflict with others, but I've been plugging away at this situation for
> some four days now with no progress. Thankfully, I'm using a test system,
> so 'bouncing' HSM is not a problem. However I do try to avoid that - it
> shouldn't be necessary in my view.
> >
> > Can anybody help, please? I'm looking for advice on what commands I
> might use to make ML2 space available again, and for some sort of
> explanation regarding the root cause of this problem.
> >
> > TIA
> > John
> >
> > ----------------------------------------------------------------------
> > For IBM-MAIN subscribe / signoff / archive access instructions,
> > send email to [email protected] with the message: INFO IBM-MAIN
>
>
>
> --
> Mike A Schwab, Springfield IL USA
> Where do Forest Rangers go to get away from it all?
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
