Hello,
I am trying to IPL a sandbox system but it is abending with the below
message :
SYSTEM COMPLETION CODE=FC8
TIME=09.48.24 SEQ=00005 CPU=0000 ASID=001A
PSW AT TIME OF ERROR 070C1000 81930492 ILC 2 INTC 0D
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW 0193048C - 00181610 0A0D9102 713BA784
AR/GR 0: 006FF6C8/80000000 1: 00000000/80FC8000
2: 00000000/006FF940 3: 00000000/00FDEA40
4: 00000000/006FF6C8 5: 00000000/006FFA58
6: 00000000/8193046C 7: 00000000/00F55880
8: 00000000/00000000 9: 00000000/01930D60
A: 00000000/006FFB18 B: 00000000/7FFE1948
C: 00000000/01226F30 D: 00000000/00C80C38
E: 00000000/00FE4600 F: 01000002/00C7B060
9.48.26 CTS1 IEA848I DUMP SUPPRESSED - ABDUMP MAY NOT DUMP
STORAGE FOR KEY 0-7 JOB MSTJCL00
09.48.28 CTS1 *CAS2030E CA SAF interface initialization--load
failed for module CSNBSYE
09.48.28 CTS1 *IEE479W MASTER SCHEDULER ABEND FC8, DUMPED, REIPL
- CODE 27
09.48.28 CTS1 IEA794I SVC DUMP HAS CAPTURED:
DUMPID=002 REQUESTED BY JOB (*MASTER*)
DUMP TITLE=COMPON=MSTR-REGION,COMPID=SC1B8,ISSUER=IEEMB860,MAST
ER SCHEDULER REGION INITIALIZATION DUMP
Any suggestions what might be causing the above message.
The manual says for FC8 as :
Explanation: The system detected an error while processing a Supervisor
Call (SVC) instruction. The last 2 digits of this completion code, nn, are
the operand of the SVC instruction in hexadecimal. For example, completion
code X'F0D' means that the error occurred while the system was processing
SVC X'0D', that is, SVC 13.
Nathan
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
