Did you apply any maintenance prior to the IPL? Any changes to LOADxx Any changes to SYS1.PARMLIB?
Lizette > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Nathan Astle > Sent: Wednesday, September 23, 2015 7:54 AM > To: [email protected] > Subject: FC8 abend Master Scheduler > > Hello, > > I am trying to IPL a sandbox system but it is abending with the below message > : > > > SYSTEM COMPLETION CODE=FC8 > TIME=09.48.24 SEQ=00005 CPU=0000 ASID=001A > PSW AT TIME OF ERROR 070C1000 81930492 ILC 2 INTC 0D > NO ACTIVE MODULE FOUND > NAME=UNKNOWN > DATA AT PSW 0193048C - 00181610 0A0D9102 713BA784 > AR/GR 0: 006FF6C8/80000000 1: 00000000/80FC8000 > 2: 00000000/006FF940 3: 00000000/00FDEA40 > 4: 00000000/006FF6C8 5: 00000000/006FFA58 > 6: 00000000/8193046C 7: 00000000/00F55880 > 8: 00000000/00000000 9: 00000000/01930D60 > A: 00000000/006FFB18 B: 00000000/7FFE1948 > C: 00000000/01226F30 D: 00000000/00C80C38 > E: 00000000/00FE4600 F: 01000002/00C7B060 > > > 9.48.26 CTS1 IEA848I DUMP SUPPRESSED - ABDUMP MAY NOT DUMP > STORAGE FOR KEY 0-7 JOB MSTJCL00 > > 09.48.28 CTS1 *CAS2030E CA SAF interface initialization--load > failed for module CSNBSYE > > 09.48.28 CTS1 *IEE479W MASTER SCHEDULER ABEND FC8, DUMPED, REIPL > - CODE 27 > 09.48.28 CTS1 IEA794I SVC DUMP HAS CAPTURED: > DUMPID=002 REQUESTED BY JOB (*MASTER*) > DUMP TITLE=COMPON=MSTR-REGION,COMPID=SC1B8,ISSUER=IEEMB860,MAST > ER SCHEDULER REGION INITIALIZATION DUMP > > Any suggestions what might be causing the above message. > > The manual says for FC8 as : > > Explanation: The system detected an error while processing a Supervisor Call > (SVC) > instruction. The last 2 digits of this completion code, nn, are the operand > of the SVC > instruction in hexadecimal. For example, completion code X'F0D' means that the > error occurred while the system was processing SVC X'0D', that is, SVC 13. > > > Nathan > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
