On 2/24/2016 6:52 AM, [email protected] wrote:
On Tuesday, February 23, 2016 at 6:20:06 PM UTC+3:30, Kurt Quackenbush wrote:
I am trying to apply UI15763 PTF on DB2 10 ( z/OS 1.12 ).
The following error is appeared :
GIM23901E ** LINK-EDIT PROCESSING FOR SYSMOD UI12617 FAILED FOR MODULE DSNHAPLY
IN LMOD DSNHPC IN THE SDSNLOAD LIBRARY. THE RETURN CODE (04)
EXCEEDED THE ALLOWABLE VALUE. DATE 16.054 - TIME 14:53:18 -
SEQUENCE NUMBER 000016.
Which the SEQUENCE NUMBER 000016 is as follows :
22I 1220 27 NAME DSNHPC(R) MAX ACCEPTABLE RC=00
54W 9203 SYMBOL SEQEXDFT UNRESOLVED. NO AUTOCALL (NCAL) SPECIFIED.
Did you bypass any requisite PTFs on this APPLY? Do you have any ++APAR
fixes installed that might have affected the load module? If not, then
open a problem with DB2 support.
Kurt Quackenbush -- IBM, SMP/E Development
Hi,
Yes I did bypass BYPASS(HOLDSYS,HOLDERR,ID) and use GROUPEXTEND during apply
the PTF.
Bypass HOLDSYS is fine. Bypass HOLDERR should not be used unless you
require the PTF and you're 99.999% sure that the HOLDERR will not impact
you. BYPASS ID SHOULD NEVER BE USED UNLESS YOU ARE EXPLICITLY TOLD BY
IBM TO USE IT. I would recommend that you RESTORE this and rerun the
APPLY WITHOUT BYPASS HOLDERR AND BYPASS ID.
Regards,
Tom Conley
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
