Thanks I am going to Issue SYSEVENT TRANSSWAP and then OKSWAP in my AS while the SRB is running one question the doc for transswap says R1 will post an ECB when the Address Space is made NON-SWAPABLE And the return code is in R1 byte 3 isn't Byte 1 - 3 cleared when the ECB is posted
Thanks -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Binyamin Dissen Sent: Monday, May 22, 2017 3:48 AM To: [email protected] Subject: Re: SRB question On Sun, 21 May 2017 18:33:54 -0400 Joseph Reichman <[email protected]> wrote: :>I was under the impression that when you scheduled a SRB with the STOEKN :>parm either on the SCHEDULE macro or on the IEAMSCHED macro the address :>space where you invoke the SCHEDULE/IEAMSCHED is :>The HOME asid and where the SRB runs is the primary. Now looking at the :>authorized assembler guide its say that "STOKEN specifies that the SRB :>routine is to receive control in the address space specified by the target :>STOKEN and with PASID=SASID=HASID". :>I had coded the SRB referencing storage in the SRB address space and :>returning it in the private address space of the SRB invoker with alet=2 I :>guess I can do SSAR to that address space and use ALET of 1 Will work "fine" as long as the SRB issuer remains swapped in (and you do not take page faults). -- Binyamin Dissen <[email protected]> http://www.dissensoftware.com Director, Dissen Software, Bar & Grill - Israel Should you use the mailblocks package and expect a response from me, you should preauthorize the dissensoftware.com domain. I very rarely bother responding to challenge/response systems, especially those from irresponsible companies. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
