That is a kind of poor design. What is the SRB doing?
On Mon, 22 May 2017 08:44:12 -0400 Joseph Reichman <[email protected]> wrote: :>Thanks I am going to Issue SYSEVENT TRANSSWAP and then OKSWAP in my AS while :>the SRB is running one question the doc for transswap says R1 will post an :>ECB when the Address Space is made NON-SWAPABLE :>And the return code is in R1 byte 3 isn't Byte 1 - 3 cleared when the ECB is :>posted :> :>Thanks :> :>-----Original Message----- :>From: IBM Mainframe Discussion List [mailto:[email protected]] On :>Behalf Of Binyamin Dissen :>Sent: Monday, May 22, 2017 3:48 AM :>To: [email protected] :>Subject: Re: SRB question :> :>On Sun, 21 May 2017 18:33:54 -0400 Joseph Reichman <[email protected]> :>wrote: :> :>:>I was under the impression that when you scheduled a SRB with the STOEKN :>:>parm either on the SCHEDULE macro or on the IEAMSCHED macro the address :>:>space where you invoke the SCHEDULE/IEAMSCHED is :> :>:>The HOME asid and where the SRB runs is the primary. Now looking at the :>:>authorized assembler guide its say that "STOKEN specifies that the :>SRB :>:>routine is to receive control in the address space specified by the target :>:>STOKEN and with PASID=SASID=HASID". :> :>:>I had coded the SRB referencing storage in the SRB address space and :>:>returning it in the private address space of the SRB invoker with alet=2 I :>:>guess I can do SSAR to that address space and use ALET of 1 :> :>Will work "fine" as long as the SRB issuer remains swapped in (and you do :>not take page faults). -- Binyamin Dissen <[email protected]> http://www.dissensoftware.com Director, Dissen Software, Bar & Grill - Israel Should you use the mailblocks package and expect a response from me, you should preauthorize the dissensoftware.com domain. I very rarely bother responding to challenge/response systems, especially those from irresponsible companies. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
