I have a SWNET PU which attaches to an AS400. The AS400 acts as a print
controller with about 200 printer sessions. in this SWNET PU.
We are adding a new LU, but it will not connect. My LU definition is
identical to the previously added printer.
Existing, working printer:
ICU1P634 LU LOCADDR=181,ISTATUS=ACTIVE,
DLOGMOD=RS3262
New, not-working printer:
ICU1P635 LU LOCADDR=214,ISTATUS=ACTIVE,
DLOGMOD=RS3262
Output of a STATUS command for the non-working printer:
06.14.18 HUP1 d net,id=ICU1P635
06.14.18 HUP1 STC06991 IST097I DISPLAY ACCEPTED
06.14.18 HUP1 STC06991 IST075I NAME = APPN.ICU1P635, TYPE = LOGICAL UNIT
IST486I STATUS= ACTIV----D, DESIRED STATE= ACTIV
IST1447I REGISTRATION TYPE = NETSRVR
IST977I MDLTAB=***NA*** ASLTAB=***NA***
IST861I MODETAB=MODEHUS3 USSTAB=ISTINCNO LOGTAB=***NA***
IST934I DLOGMOD=RS3262 USS LANGTAB=***NA***
IST597I CAPABILITY-PLU INHIBITED,SLU ENABLED ,SESSION LIMIT 00000001
IST136I SWITCHED SNA MAJOR NODE = SWPUF43
IST081I LINE NAME = LE213000, LINE GROUP = GRPPUF43, MAJNOD = XCAPUF43
IST135I PHYSICAL UNIT = PUF43
IST082I DEVTYPE = LU
IST654I I/O TRACE = OFF, BUFFER TRACE = OFF
IST1500I STATE TRACE = OFF
IST171I ACTIVE SESSIONS = 0000000000, SESSION REQUESTS = 0000000000
IST314I END
There is a new programmer on the AS/400. The person that has done this
in the past is gone. I don't know if they have a bad definition or they
have not started something right on their end.
When I display the SWNET node, the status shows:
ICU1P635 ACTIV----D
What does ACTIV----D indicate?
Any thoughts for debugging this?
--
Tony Thigpen
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
