At this point in time I would not expect any. I just updated an LPAR this past weekend w/no issues.
-----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Todd Burrell Sent: Wednesday, February 21, 2018 12:27 PM To: [email protected] Subject: Any issues with $ACTIVATE,LEVEL=Z22 command We've done the $ACTIVATE,LEVEL=Z22 command on our test system and seen no issues, but I wanted to run it by this group to see if there have been any issues that anyone has seen when doing this? I've checked our CHECKPOINT's and they have plenty of room. We will also be doing the $TSPOOLDEF,CYL_MANAGED=ALLOWED command at the same time. Thanks Todd Burrell ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ::DISCLAIMER:: -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
