A cold start is a big dill... -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jesse 1 Robinson Sent: Wednesday, February 21, 2018 3:17 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Any issues with $ACTIVATE,LEVEL=Z22 command
I've never been in a pickle, but I've had to do a cold start. Much colder than a pickle (or so I imagine). . . J.O.Skip Robinson Southern California Edison Company Electric Dragon Team Paddler SHARE MVS Program Co-Manager 323-715-0595 Mobile 626-543-6132 Office ⇐=== NEW robin...@sce.com -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Carmen Vitullo Sent: Wednesday, February 21, 2018 12:31 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: (External):Re: Any issues with $ACTIVATE,LEVEL=Z22 command just some food for thought, once you're z22 mode there's no EASY way back.... that's the biggest reason I've delayed this on my prod plex, I'm comfortable now but for any reason I had to revert back to z/OS 2.1, I'd be in a pickle :) Carmen Vitullo ----- Original Message ----- From: "Todd Burrell" <todd_burr...@csx.com> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Wednesday, February 21, 2018 12:41:43 PM Subject: Re: Any issues with $ACTIVATE,LEVEL=Z22 command Yeah - we're planning on doing both at the same time ($TSPOOLDEF and $ACTIVATE). -----Original Message----- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Carmen Vitullo Sent: Wednesday, February 21, 2018 1:39 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Any issues with $ACTIVATE,LEVEL=Z22 command forgot to mention CYL_MANAGED support can be changed dynamically $T SPOOLDEF,CYL_MANAGED=ALLOWED Carmen Vitullo ----- Original Message ----- From: "Carmen Vitullo" <cvitu...@hughes.net> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Wednesday, February 21, 2018 12:34:58 PM Subject: Re: Any issues with $ACTIVATE,LEVEL=Z22 command no problems on my test system after expanding my checkpoint but my production systems MAS I get $HASP895 z22 ACTIVATION WILL FAIL IF ISSUED FROM THIS MEMBER. $HASP895 THE FOLLOWING ISSUES PREVENT ACTIVATION: $HASP895 -- CYL_MANAGED SUPPORT MUST BE ACTIVATED. I'm in no rush right now to get to z22 mode Carmen Vitullo ----- Original Message ----- From: "Todd Burrell" <todd_burr...@csx.com> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Wednesday, February 21, 2018 12:27:11 PM Subject: Any issues with $ACTIVATE,LEVEL=Z22 command We've done the $ACTIVATE,LEVEL=Z22 command on our test system and seen no issues, but I wanted to run it by this group to see if there have been any issues that anyone has seen when doing this? I've checked our CHECKPOINT's and they have plenty of room. We will also be doing the $TSPOOLDEF,CYL_MANAGED=ALLOWED command at the same time. Thanks Todd Burrell ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
