Here are a few links to look at.  The famous bottom line is you have to be on 
the right level of z/OS and the right level of hardware for this to work.  On 
the hardware side it requires a z13 or higher and the DASD device would also 
need to support it to get a full picture.  On the z/OS side I think it takes 
z/OS 2.2 or higher.

https://www.ibm.com/developerworks/community/blogs/e0c474f8-3aad-4f01-8bca-f2c12b576ac9/entry/test?lang=en

https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.2.0/com.ibm.zos.v2r2.ieag100/d3m.htm



Thanks..

Paul Feller
AGT Mainframe Technical Support

-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf 
Of R.S.
Sent: Monday, March 12, 2018 06:17
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Interesting issue with D M=DEV with the LINKINFO option

W dniu 2018-03-09 o 17:10, Feller, Paul pisze:
> Just thought I would mention an interesting issue we ran into with the D 
> M=DEV command using the LINKINFO option.  We are running z/OS 2.2 on two z13 
> boxes.  We are in the process of removing our FICON connection from several 
> FICON switches to direct connection for our DASD and TAPE devices.  When we 
> did a dynamic IOGEN change to move some of the DASD connections we noticed 
> that the LINKINFO display still thought there was a switch in the middle of 
> things.  Naturally we did configure the channels offline/online as part of 
> the IOGEN change.  We tried the REFRESH option on the LINKINFO, but that did 
> not fix things.  We did notice an IPL did correct the display.  We opened an 
> PMR with IBM on the issue.  Basically the response from IBM is they did not 
> test (code for) the situation of removing FICON switches from the 
> environment.  The support center said they would open an APAR but it may not 
> be fixed until the next release of z/OS.

What is LINKINFO option?

-- 
Radoslaw Skorupka
Lodz, Poland




======================================================================


        --
 Treść tej wiadomości może zawierać informacje prawnie chronione Banku 
przeznaczone wyłącznie do użytku służbowego adresata. Odbiorcą może być jedynie 
jej adresat z wyłączeniem dostępu osób trzecich. Jeżeli nie jesteś adresatem 
niniejszej wiadomości lub pracownikiem upoważnionym do jej przekazania 
adresatowi, informujemy, że jej rozpowszechnianie, kopiowanie, rozprowadzanie 
lub inne działanie o podobnym charakterze jest prawnie zabronione i może być 
karalne. Jeżeli otrzymałeś tę wiadomość omyłkowo, prosimy niezwłocznie 
zawiadomić nadawcę wysyłając odpowiedź oraz trwale usunąć tę wiadomość 
włączając w to wszelkie jej kopie wydrukowane lub zapisane na dysku.

 This e-mail may contain legally privileged information of the Bank and is 
intended solely for business use of the addressee. This e-mail may only be 
received by the addressee and may not be disclosed to any third parties. If you 
are not the intended addressee of this e-mail or the employee authorized to 
forward it to the addressee, be advised that any dissemination, copying, 
distribution or any other similar activity is legally prohibited and may be 
punishable. If you received this e-mail by mistake please advise the sender 
immediately by using the reply facility in your e-mail software and delete 
permanently this e-mail including any copies of it either printed or saved to 
hard drive.

 mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 Warszawa, 
www.mBank.pl, e-mail: kont...@mbank.plsąd Rejonowy dla m. st. Warszawy XII 
Wydział Gospodarczy Krajowego Rejestru Sądowego, nr rejestru przedsiębiorców 
KRS 0000025237, NIP: 526-021-50-88. Według stanu na dzień 01.01.2018 r. kapitał 
zakładowy mBanku S.A. (w całości wpłacony) wynosi 169.248.488 złotych.
    

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Reply via email to