That's helpful. Thanks. How do I get the IP address of the HMCs?
Sent from ProtonMail, Swiss-based encrypted email. GPG Public Key - https://api.protonmail.ch/pks/lookup?op=get&[email protected] ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Monday, August 12, 2019 4:09 PM, Dana Mitchell <[email protected]> wrote: > That might be because your SE's are not connected to your external network > and they cannot directly contact your NTP server(s). We have our HMCs getting > time from NTP servers on our netowork (make sure 'Enable as time server' is > checked). Then on the System/Sysplex ETS configuration tab enter the > addresses of HMCs on the internal network. This is on z114's but hopefully > similar. > Dana > > On Mon, 12 Aug 2019 17:38:11 +0000, Mark Jacobs [email protected] > wrote: > > > We have a couple of NTP servers in our internal network. All of them are > > accessible from the internal network, no firewalls involved. When I'm on > > the HMC and add one of them as an NTP server for the console to get its > > time from, it's able to reach it. When I add the same server IP address to > > the System/Sysplex ETS tab and test connectivity, it's going me a > > communications failure. This is on a z13s processor. > > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
