You are defining the NIC, but not coupling to the VSwitch. I think Alan mentioned last week to use the NICDEF statement in the directory.
On Wednesday 31 May 2006 1:27 pm, Hooker, Don - OIT wrote: > We are still having problems getting the above communications working. > On our VSE 2.62 systems that is. IBM recommended some PTFs: > > UD52153 was already applied. I was getting: > > IPN631I Control has been passed to the TCP/IP engine > 0016: IPL605E Unable to Initialize IJBOSA, return code: 1 > 0016: IPL609E Unable to initialize OSA Express, Link: VM_TCPIP > 0P27I I UNKNWN DEV SYSXXX=D00 > CCSW=00000871200E000100 CCB=000000 > SNS= 8200 > > IBM also recommended UD52628 but I found UD52332 first which seemed to > describe our symptoms so > I applied that first (despite it being superceded by UD52628) but when I > continued to have problems, > I went ahead and applied UD52628. Then I was getting: > > IPL605E Unable to Initialize IJBOSA, return code: 57472 > IPL609E Unable to initialize OSA Express, Link: VM_TCPIP > > I installed z/VSE 3.11 and tested it there and it worked fine. > > The trouble is we need to get it working on our VSE 2.62 systems. > Does anybody on VSE 2.6 have it working? > > I tried copying the IJBOSA phase from the z/VSE 3.11 system to a VSE > 2.62 system and I get: > > 0S39I ERROR DURING OSA EXPRESS PROCESSING,REASON=0035 > CUU=0D00,RETCODE=E080 > 0S02I A CANCEL OR CANCEL ALL MACRO WAS ISSUED > 0S00I SUB SPINCPU CANCELED > > Here are some definitions: > > In PROFILE EXEC for the VSE: > > CP DEF NIC D00 TYPE QDIO DEV 3 > > VSE IPL ADD statement: > > ADD D00:D02,OSAX QDIO to VSWITCH for acc to VM TCPIP > > In AUTOLOG1 PROFILE EXEC: > > 'CP SET VSWITCH DTCVSW1 GRANT DTCVSW1' > 'CP SET VSWITCH DTCVSW1 GRANT TCPIP' > 'CP SET VSWITCH DTCVSW1 GRANT VSETSG1' > > Here is result of a Q VSWITCH: > > q vswitch dtcvsw1 details acc > > VSWITCH SYSTEM DTCVSW1 Type: VSWITCH Connected: 1 Maxconn: INFINITE > > PERSISTENT RESTRICTED NONROUTER Accounting: OFF > > VLAN Unaware > > State: Ready > > IPTimeout: 5 QueueStorage: 8 > > Portname: UNASSIGNED RDEV: B000 Controller: DTCVSW1 VDEV: B000 > > Portname: UNASSIGNED RDEV: C000 Controller: DTCVSW1 > > Authorized userids: > > DTCVSW1 SYSTEM TCPIP VSEDEV2 VSETSG1 ZVSEBASE > > VSWITCH Connection: > > RX Packets: 4108339 Discarded: 4 Errors: 0 > > TX Packets: 7319948 Discarded: 0 Errors: 0 > > RX Bytes: 1102773999 TX Bytes: 9321899949 > > Device: B002 Unit: 002 Role: DATA > > Adapter Owner: TCPIP NIC: E000 Name: UNASSIGNED > > RX Packets: 4108343 Discarded: 0 Errors: 0 > > TX Packets: 7319955 Discarded: 0 Errors: 0 > > RX Bytes: 1102774777 TX Bytes: 9321900961 > > Device: E002 Unit: 002 Role: DATA > > Options: Broadcast Multicast IPv4 VLAN > > Unicast IP Addresses: > > > > MORE... > OITDC01 > 10.128.254.57 MAC: 02-00-00-00-00-01 > 172.16.32.2 MAC: 02-00-00-00-00-01 > 172.30.8.11 MAC: 02-00-00-00-00-01 > 172.30.8.52 MAC: 02-00-00-00-00-01 > Multicast IP Addresses: > 224.0.0.1 MAC: 01-00-5E-00-00-01 > Ready; > > > So once again, does anyone have this working on a VSE 2.62 system under > z/VM 5.2? > Does anyone have any ideas how I can get it to work? > > Thanks in advance, > Don -- Rich Smrcina VM Assist, Inc. Main: (262)392-2026 Cell: (414)491-6001 Ans Service: (360)715-2467 rich.smrcina at vmassist.com Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
