Joan We setup our OSA ICC to use IBM PCOMM with a windows machine.
I setup the TN3270 client to have infinite retries and no wait time between TN3270 connections. This redbook help considerably http://www.redbooks.ibm.com/redbooks/pdfs/sg246364.pdf the TN3270 client needs to be connected to the OSA ICC port before the VM ipl is done. eric At 03:07 PM 5/21/2007, you wrote: >This is a multi-part message in MIME format. > >------_=_NextPart_001_01C79BDB.3C744759 >Content-Type: text/plain; > charset="us-ascii" >Content-Transfer-Encoding: quoted-printable > >James, >what specifically did you mean by your first question: Did you TN3270 >to the ICC adapter IP # before ipl'ing. =20 >=20 >How do you TN3270 to the IP # before ipl'ing and AFTER OSA is reset with >the ipl? We had the TN3270 session ready before the IPL and then the >OSA is reset in the IPL, so is there a timing issue with having to get >the TN3270 session ready again for the IPL to find it to send the SAIPL >screen? >=20 >=20 >=20 >We think the IOCP and system config are correct. >=20 >thanks again for your help >=20 >Joan M. Gerads=20 >Systems & Programming=20 >SCICOM Data Services, Ltd.=20 >10101 Bren Rd. East=20 >Minnetonka, MN 55343=20 >Direct: 952-936-4170=20 >Toll Free: 1-800-488-9087=20 >Fax: 952-932-3936=20 > > >This e-mail message, including any attachments, is intended only for the >use of the recipient(s) and may contain privileged and confidential >information, including but not limited to information that is protected >under HIPAA or other state/federal privacy rules. Any unauthorized >review; disclosure, copying, distribution or use is prohibited. If you >have received this e-mail in error, please notify the sender immediately >by reply e-mail and destroy all copies of the original message.=20 > >________________________________ > >From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On >Behalf Of James M >Sent: Monday, May 21, 2007 12:54 PM >To: [email protected] >Subject: Re: VM CONSOLE Experts...I need your help > > >Joan- >There's a lot to consider & check. >Did you tn3270 to the ICC adapter IP # before ipl'ing? >Is your iocp correct? >Is your system config correct - console defined same as ipl device on >ICC def.=20 >Are your ICC definitions correct - valid ipl device & pc ip # specified >correctly >I'm using the hummingbird emulator w/o problems. >-James > > >On 5/21/07, Joan Gerads <[EMAIL PROTECTED]> wrote:=20 > > I have a couple more questions regarding setting up a VM console >through OSA-ICC.=20 > > z/VM version 5.2 - =20 > IBM z9 2096 BC processor 1 LPAR=20 > VM running multiple VSE guests=20 > > 1) is there any software restrictions as far as 3270 emulator >software running on the PC for the VM console to work on it? We are >currently trying it with QWS Plus Version 4.0 (JollyGiant Software)? > > Is anyone else using that software? Or what is working for you?=20 > > 2) secondly, on the HMC screen for OSA Advanced Facilities, >'active sessions configuration ', there is a field called 'MIFID'. In >the IBM Redbook example, this field is set to a 'C ' on a VM console >definition. On our screen, our VM console session, it is set to a '1' >(the default?)....what exactly does ' C' mean?=20 > > On a trial IPL of VM this last weekend, we could not get the >OSA-ICC PC to come up as the VM console...I am pretty sure the system >configuration is correct...we can 'DISC' from the dummy tube and >'RECONNECT' on the PC. We just have not figured out the VM IPL- how to >get it to come up on the OSA-ICC PC. > > Thanks again for all your help!=20 > > Joan M. Gerads=20 > Systems & Programming=20 > SCICOM Data Services, Ltd.=20 > 10101 Bren Rd. East=20 > Minnetonka, MN 55343=20 > Direct: 952-936-4170=20 > Toll Free: 1-800-488-9087=20 > Fax: 952-932-3936=20 > > > This e-mail message, including any attachments, is intended only >for the use of the recipient(s) and may contain privileged and >confidential information, including but not limited to information that >is protected under HIPAA or other state/federal privacy rules. Any >unauthorized review; disclosure, copying, distribution or use is >prohibited. If you have received this e-mail in error, please notify >the sender immediately by reply e-mail and destroy all copies of the >original message.=20 > >=09 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > z/VM version 5.2 - =20 > IBM z9 2096 BC processor 1 LPAR=20 > VM running multiple VSE guests=20 > > > Two questions that I could use any advice, tips or tricks with:=20 > > > We recently migrated to z/VM 5.2 and an IBM z9 BC processor:=20 > > 1) We recently switched our VM console from a dummy terminal >to an OSA connection. We 'disc' VM on the dummy terminal and >reconnected the console on the PC. That part worked fine. We will not >be IPL'ing VM until this weekend so my question is: What do we need to >do to have the OSA console be recognized as the VM console during an IPL >of VM? For the dummy terminal, we had the address hard assigned in the >system configuration under Console Definitions: Operator_Consoles....How >do you do that same thing with an OSA VM console? An example would be >helpful. Thanks=20 > > 2) We are planning on moving our VM packs from one set of >3390 Disk drives to another set of 3390 Disk drives. Any hints on the >steps that should be followed to make this an easy transition? Thanks >in advance=20 > > > > Joan M. Gerads=20 > Systems & Programming=20 > SCICOM Data Services, Ltd.=20 > 10101 Bren Rd. East=20 > Minnetonka, MN 55343=20 > Direct: 952-936-4170=20 > Toll Free: 1-800-488-9087=20 > Fax: 952-932-3936=20 > > > This e-mail message, including any attachments, is intended only >for the use of the recipient(s) and may contain privileged and >confidential information, including but not limited to information that >is protected under HIPAA or other state/federal privacy rules. Any >unauthorized review; disclosure, copying, distribution or use is >prohibited. If you have received this e-mail in error, please notify >the sender immediately by reply e-mail and destroy all copies of the >original message.=20 > > > > >------_=_NextPart_001_01C79BDB.3C744759 >Content-Type: text/html; > charset="us-ascii" >Content-Transfer-Encoding: quoted-printable > ><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> >James, >what specifically did you mean by your first=20 question: Did you TN3270 to >the ICC adapter IP # before=20 ipl'ing. > >How do you TN3270 to the IP # before ipl'ing = and AFTER OSA=20 is reset with >the ipl? We had the TN3270 session ready before the = IPL and=20 then the OSA >is reset in the IPL, so is there a timing issue with having = to get=20 the >TN3270 session ready again for the IPL to find it to send the SAIPL=20 screen? > > > >We think the IOCP and system config are=20 correct. > >thanks again for your help > > >Joan M. Gerads = >Systems & Programming = >SCICOM Data Services, Ltd. = >10101 Bren Rd. East = >Minnetonka, MN 55343 = >Direct: 952-936-4170 = >Toll Free: = 1-800-488-9087=20 >Fax: 952-932-3936 = > >This e-mail message, including any = attachments, is=20 intended only for the >use of the recipient(s) and may contain privileged = and=20 confidential >information, including but not limited to information that = is=20 protected >under HIPAA or other state/federal privacy rules. Any=20 unauthorized review; >disclosure, copying, distribution or use is=20 prohibited. If you have >received this e-mail in error, please = notify the=20 sender immediately by >reply e-mail and destroy all copies of the = original=20 message. > > >---------- >From: = The IBM z/VM=20 Operating System [mailto:[EMAIL PROTECTED] On Behalf >Of = James=20 M >Sent: Monday, May 21, 2007 12:54 PM >To:=20 [email protected] >Subject: Re: VM CONSOLE Experts...I = need your=20 help > >Joan- >There's a lot to consider & check. >Did you = tn3270 to=20 the ICC adapter IP # before ipl'ing? >Is your iocp correct? >Is your = system=20 config correct - console defined same as ipl device on ICC >def. >Are = your ICC=20 definitions correct - valid ipl device & pc ip # specified = >correctly >I'm=20 using the hummingbird emulator w/o problems. >-James > >On 5/21/07, Joan=20 Gerads <<3d.htm>[EMAIL PROTECTED]>=20 wrote: > >I have a couple more questions = regarding setting up=20 a VM console through >OSA-ICC. > >z/VM version 5.2 - = >IBM z9 2096 BC processor 1 LPAR >VM running multiple VSE guests > >1) is there any software restrictions as far as = 3270=20 emulator software >running on the PC for the VM console to work on = it? We=20 are currently >trying it with QWS Plus Version 4.0 (JollyGiant=20 Software)? > >Is anyone else using that software? Or = what is=20 working for you? > >2) =20 secondly, on the HMC screen for OSA Advanced Facilities, = 'active >sessions configuration ', there is a field called 'MIFID'. In the = IBM >Redbook=20 example, this field is set to a 'C=20 ' on a VM console = >definition. On our=20 screen, our VM console session, it is set to a '1' (the >= default?) .what exactly does=20 ' C'=20 mean? > >On a trial IPL of VM this last weekend, = we could=20 not get the OSA-ICC PC >to come up as the VM console I am pretty = sure the=20 system configuration is >correct we can 'DISC' from the dummy = tube and=20 'RECONNECT' on the PC. We >just have not figured out the = VM IPL- how = to get it to=20 come up on the >OSA-ICC PC. > >Thanks again for all your help! = > >Joan M. Gerads = >Systems & Programming = >SCICOM Data Services, Ltd. = >10101 Bren Rd. East = >Minnetonka, MN 55343 = >Direct: 952-936-4170 = >Toll Free: = 1-800-488-9087=20 >Fax: = 952-932-3936 > >This e-mail message, including any = attachments, is=20 intended only for the >use of the recipient(s) and may contain = privileged and=20 confidential >information, including but not limited to information = that is=20 protected >under HIPAA or other state/federal privacy rules. Any=20 unauthorized review; >disclosure, copying, distribution or use is=20 prohibited. If you have >received this e-mail in error, please = notify the=20 sender immediately by >reply e-mail and destroy all copies of the = original=20 message. > >=20 = > > > > > > > > > > > > > > > > > ><= BR> > > > > > > > > > > > > >z/VM version 5.2 - = >IBM z9 2096 BC processor 1 LPAR >VM running multiple VSE guests > >Two questions that I could use any = advice, tips or=20 tricks with: > >We recently migrated to z/VM 5.2 and an = IBM z9 BC=20 processor: > >1) We recently = switched our VM=20 console from a dummy terminal to an OSA >connection. We 'disc' VM = on the=20 dummy terminal and reconnected the >console on the PC. That part = worked=20 fine. We will not be IPL'ing VM >until this weekend so my = question=20 is: What do we need to do to have the >OSA console be recognized as the = VM=20 console during an IPL of VM? For >the dummy terminal, we = had the=20 address hard assigned in the system >configuration under Console = Definitions:=20 Operator_Consoles .How do you do >that same thing with an OSA VM=20 console? An example would be helpful. >Thanks=20 > >2) We are planning on = moving our=20 VM packs from one set of 3390 Disk >drives to another set of 3390 Disk=20 drives. Any hints on the steps that >should be followed to make = this an=20 easy transition? Thanks in advance > > >Joan M. Gerads = >Systems & Programming = >SCICOM Data Services, Ltd. = >10101 Bren Rd. East = >Minnetonka, MN 55343 = >Direct: 952-936-4170 = >Toll Free: = 1-800-488-9087=20 >Fax: = 952-932-3936 > >This e-mail message, including any = attachments, is=20 intended only for the >use of the recipient(s) and may contain = privileged and=20 confidential >information, including but not limited to information = that is=20 protected >under HIPAA or other state/federal privacy rules. Any=20 unauthorized review; >disclosure, copying, distribution or use is=20 prohibited. If you have >received this e-mail in error, please = notify the=20 sender immediately by >reply e-mail and destroy all copies of the = original=20 message. > > > >------_=_NextPart_001_01C79BDB.3C744759-- Eric Schadow Mainframe Technical Support www.davisvision.com ------------------------------------------------------------------------ The information contained in this communication is intended only for the use of the recipient(s) named above. It may contain information that is privileged or confidential, and may be protected by State and/or Federal Regulations. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please return it to the sender immediately and delete the original message and any copy of it from your computer system. If you have any questions concerning this message, please contact the sender. ------------------------------------------------------------------------
