On Sunday, 08/12/2007 at 10:13 EDT, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: > Hi listers, > > I have a problem in setting up the guest lan for a zOS 1.5 on my zVM > 5.3. With a VSE 2.7 guest it works perfect but not with the zOS. > > The messages while starting the tcpip device are the following: > > 15.00.37 MVS1 v tcpip,,start,glanqdio > 15.00.38 MVS1 STC03011 EZZ0060I PROCESSING COMMAND: VARY TCPIP,,START, > GLANQDIO > 15.00.38 MVS1 STC03011 EZZ0053I COMMAND VARY START COMPLETED SUCCESSFULLY > 15.00.38 MVS1 STC03011 EZZ4308I ERROR: CODE=8010002A DURING ACTIVATION > OF DEVICE GLANQDIO. DIAGNOSTIC CODE: 02 > 15.00.38 MVS1 STC03010 IST1631I TRL0E00 SUBCHANNEL 0E01 QDIO DEVICE TYPE > NOT OSD > > I have defined the devices in HCD as CHPID 01 OSD and devices as OSA. I > have attached a text file with the complete config (HCD, TCPPROF, > VTAM-TRL Guestlan/NIC-defs). In the mail body it is sometimes a bit > difficult to read the lines because of the line breaks. I think I have a > mistake somewhere or I miss something. I've checked already the > archives, but the related items didn't lead me to the solution. What I > don't understand is, that it complains about E01 not to be a QDIO > device. I think that zVM should simulate that to the guest and on zOS I > have defined it as OSA Express as you can see in the file.
I didn't see anything wrong, but make sure you are current with CP and z/OS Comms Server service. I would be tempted to call the Support Center (Comms Server) and explain the problem. As you say, the virtual NICs are QDIO. Alan Altmark z/VM Development IBM Endicott
