Hello Everyone,
I am just getting the IOCP ready for a ds6800 connected to four
ports on the Z890.
I would like to some help with the IOCP.
Even though we have to have LPAR, there is only one called
PROD.
The FICON cards are the 2320 FICON Express SX. Two 1 gig ports
per card.
I would like to have all four ports able to access all dasd.
I am figuring to have the DS6800 formated for 30 3390 mod 3, 306 3390
mod 9, and 30 3390 mod 27. (366 devices)
I know that am missing some RESOURCE PARTITION and various CSS
commands.
I am reading about them now. And I still have lots of
questions.
I would appreciate any insight and idea's. Than
CHPID PCHID=130,PATH=30,TYPE=FC,SHARED .FICON DS6800
CHPID PCHID=131,PATH=31,TYPE=FC,SHARED .FICON DS6800
CHPID PCHID=140,PATH=40,TYPE=FC,SHARED .FICON DS6800
CHPID PCHID=141,PATH=41,TYPE=FC,SHARED .FICON DS6800
*********************************************************
* chpids 130/131/140/141 paths 30/31/40/41 *
* IBM ds6400 system *
*********************************************************
*
CU130 CNTLUNIT CUNUMBR=130,PATH=(30,40), X
UNITADD=((00,256)),UNIT=2105
CU140 CNTLUNIT CUNUMBR=140,PATH=(31,41), X
UNITADD=((00,256)),UNIT=2105
DV800 IODEVICE ADDRESS=(0800,256),CUNUMBR=(130,140), X
UNIT=3390,UNITADD=00
DV900 IODEVICE ADDRESS=(0900,256),CUNUMBR=(140,130), X
UNIT=3390,UNITADD=00
*
Ed Martin
330-588-4723
ext 40441
