It looks good to me. I have not connected to DASD directly in a long
time, but I believe this would work as well. Anybody know the
difference, pros/cons, etc.?
CU0130 CNTLUNIT CUNUMBR=0130,PATH=(30,40,31,41),CUADD=01, X
UNITADD=((00,256)),UNIT=2105
CU0230 CNTLUNIT CUNUMBR=0230,PATH=(30,40,31,41),CUADD=02, X
UNITADD=((00,256)),UNIT=2105
DV800 IODEVICE ADDRESS=(0800,256),CUNUMBR=(0130), X
UNIT=3390
DV900 IODEVICE ADDRESS=(0900,256),CUNUMBR=(0230), X
UNIT=3390
Regards,
Kevin
________________________________
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Edward M. Martin
Sent: Thursday, December 06, 2007 2:05 PM
To: [email protected]
Subject: Re: REquest for IOCP for DS6800 FICON Z890
Hello Kevin,
Thanks that is what I was looking for.
I have this right now.
*
CU0130 CNTLUNIT CUNUMBR=0130,PATH=(30),CUADD=01, X
UNITADD=((00,256)),UNIT=2105
CU0140 CNTLUNIT CUNUMBR=0140,PATH=(40),CUADD=01, X
UNITADD=((00,256)),UNIT=2105
CU0131 CNTLUNIT CUNUMBR=0131,PATH=(31),CUADD=01, X
UNITADD=((00,256)),UNIT=2105
CU0141 CNTLUNIT CUNUMBR=0141,PATH=(41),CUADD=01, X
UNITADD=((00,256)),UNIT=2105
CU0230 CNTLUNIT CUNUMBR=0230,PATH=(30),CUADD=02, X
UNITADD=((00,256)),UNIT=2105
CU0240 CNTLUNIT CUNUMBR=0240,PATH=(40),CUADD=02, X
UNITADD=((00,256)),UNIT=2105
CU0231 CNTLUNIT CUNUMBR=0231,PATH=(31),CUADD=02, X
UNITADD=((00,256)),UNIT=2105
CU0241 CNTLUNIT CUNUMBR=0241,PATH=(41),CUADD=02, X
UNITADD=((00,256)),UNIT=2105
DV800 IODEVICE ADDRESS=(0800,256),CUNUMBR=(0130,0140,0141,0131), X
UNIT=3390
DV900 IODEVICE ADDRESS=(0900,256),CUNUMBR=(0241,0231,0230,0240), X
UNIT=3390
*
Ed Martin
330-588-4723
ext 40441
