Alan, Your email quotes mine, but I do not see any connection between what I asked and your response.
To clarify my question: If an individual MITIME setting was *added* manually, either for a device class or a specific address (or range of addresses), when will those manual settings be removed, and the MITIME values revert to their defaults? I had posted my question in response to someone (sorry I forgot who) saying: > I assume after every IPL they would be reset > to some initial setting since my recollection is that the system 'saves' them through IPLs, until a cold start. Thanks, Shimon ---- Original message ---- >Date: Mon, 21 Jan 2008 13:40:36 -0500 >From: Alan Altmark <[EMAIL PROTECTED]> >Subject: Re: MITIME settings are being set by ? >To: [email protected] > >On Monday, 01/21/2008 at 11:13 EST, Shimon Lebowitz <[EMAIL PROTECTED]> >wrote: >> You know what they say "assume" stands for? >> >> I seem to remember that nothing but a cold start >> removes MITIME settings that have been added. >> >> Does anyone have anything black-on-white (or >> bit-on-CD) about this? > >The description of SET MITIME gives the default values. Looking at the >IBM ESS S/390 Command Reference (E10, E20, F10, F20), the "primary missing >interrupt timer interval" is 30 seconds (from the NEQ returned by the Read >Configuration Data CCW). > >Our test systems show 40 seconds. As a guess, the difference is due to >different models (e.g. DS6000, DS8000). > >Alan Altmark >z/VM Development >IBM Endicott
