Brian,
According to the CP Commands and Utilities Reference, the following defaults are provided: . DASD 00:15 . GRAF 01:10 . UR 01:00 . TAPE 10:00 . SWITCH 05:00 . MISC 12:00 For DASD and TAPE, the supplied defaults will be used if and only if the subsystem does not return a primary timeout value. The supplied defaults, or for DASD and TAPE, the primary timeout value returned by the subsystem, will be put into place following an IPL. Subsequently, an authorized operator may change the values by way of a SET MITIME command. For DASD and TAPE subsystems, check the appropriate subsystem documentation for the primary timeout value returned, if any. John P. Baker Systems Engineer HFD Technologies From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Hamilton, Brian Sent: Monday, January 21, 2008 10:39 AM To: [email protected] Subject: MITIME settings are being set by ? Where would I find the initial or override settings for MITIME's? I've looked in the SYSTEM config and on the AUTOLOG1 or 2 ids but I don't see any SET commands. e.g. MITIME ON 2060-2085 00:40 MITIME ON 2000-201F 00:40 MITIME ON 0862 62:30 MITIME ON 0861 20:50 MITIME ON 0860 20:50 MITIME ON DASD 00:15 MITIME ON GRAF 01:10 MITIME ON TAPE 10:00 MITIME ON UR 01:00 MITIME ON SWITCH 05:00 MITIME ON MISC 12:00
