Here is what I have and it works great.
; DEVICE and LINK for VIPA
DEVICE VIPADEV1 VIRTUAL 0
LINK VIPALINK1 VIRTUAL 0 VIPADEV1
; Virtual NIC to talk to VSWITCH zVM1
DEVICE [EMAIL PROTECTED] OSD 0800 NONROUTER AUTORESTART
LINK ETH0 QDIOETHERNET [EMAIL PROTECTED]
; CHPID = 20
DEVICE [EMAIL PROTECTED] HIPERS 7100 AUTORESTART
LINK HYPER1 QDIOIP [EMAIL PROTECTED] MTU 8192
; (End DEVICE and LINK statements)
HOME
128.231.160.19 255.255.0.0 ETH0
128.231.160.20 255.255.0.0 VIPALINK1
10.1.160.19 HYPER1
; (End HOME Address information)
GATEWAY
; Static routes via hipersockets to Titan lpars
; Network Subnet First Link MTU
; Address Mask Hop Name Size
; ------------- --------------- --------------- ---------------- -----
128.231.64.34 255.255.255.255 = HYPER1 8192
128.231.64.50 255.255.255.255 = HYPER1 8192
128.231.64.54 255.255.255.255 = HYPER1 8192
128.231.64.64 255.255.255.255 = HYPER1 8192
10.0.0.0 255.0.0.0 = HYPER1
8192
DEFAULTNET 128.231.160.1 ETH0 1500
; (End GATEWAY Static Routing information)
; ----------------------------------------------------------------------
START [EMAIL PROTECTED]
START [EMAIL PROTECTED]
CHPID and address 7100 are the same on both sides. The 128.231.64.xx
addresses in the GATEWAY are the addresses of my 4 z/OS lpars. Make sure
the routing on the z/OS side is correct.
Bobby Bauer
Center for Information Technology
National Institutes of Health
Bethesda, MD 20892-5628
301-594-7474
________________________________
From: Kreiter, Chuck [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 06, 2008 1:05 PM
To: [email protected]
Subject: z/VM 5.2 Hipersocket Connection to z/OS
Does anyone have a working TCPIP configuration file for z/VM that
includes both an ethernet and zSeries hipersocket configuration they
would be willing to share? From z/VM, I can ping both the network and
hipersocket address but I cannot ping z/OS. Same goes from the z/OS
side. I can ping z/OS to z/OS so I think my z/OS hipersocket config is
correct.
Thanks,
Chuck Kreiter
Systems Programming Supervisor
State Auto Insurance
