On Thursday, 03/06/2008 at 01:04 EST, "Kreiter, Chuck"
<[EMAIL PROTECTED]> wrote:
> Does anyone have a working TCPIP configuration file for z/VM that
includes both
> an ethernet and zSeries hipersocket configuration they would be willing
to
> share? From z/VM, I can ping both the network and hipersocket address
but I
> cannot ping z/OS. Same goes from the z/OS side. I can ping z/OS to
z/OS so I
> think my z/OS hipersocket config is correct.
You have a routing error. You didn't post a picture, but it sounds like
OSA ---- z/VM -----HiperSocket----z/OS
A.1 A.2 |B.1 C.1
z/OS
1. You can ping A.1 and A.2 while logged on to A. No surprise. No
routing is required.
2. You cannot ping B.1 or C.1 from A
3. B.1 and C.1 can ping each other.
Ergo, you have a routing error in either A or (both) B and C. Check your
subnet masks. Remember that the HiperSocket is a separate subnet.
Alan Altmark
z/VM Development
IBM Endicott
