I have issued the following commands: 

 q system 47e                                         
                                                     
DASD 047E ATTACHED SYSTEM 0002 Z3Z1P1                
D00A     047E R/W      , BH3A     047E R/W           

q system 49e                                  
                                              
DASD 049E ATTACHED SYSTEM 0002 Z3Z1S1         
D00A     049E R/W      , BH3A     049E R/W    

I have tried the following:

#CP DETACH 47E FROM BH3A                      
HCPDTG121E DASD 047E not attached to BH3A    

Both 47E and 49E are linked by PROFILE MVSLINK to MVSDASD (who is not
logged on).


Daniel Allen | Senior Systems Programmer | 1-800-457-3736x11241
 Serena Software - The Mashups Are Coming

-----Original Message-----
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Alan Altmark
Sent: Monday, March 10, 2008 10:45 AM
To: [email protected]
Subject: Re: I have 2 devices in use

On Monday, 03/10/2008 at 01:24 EDT, Daniel Allen <[EMAIL PROTECTED]>
wrote:
> When I query 47E or  49E, here is the response:
>  
> DASD 047E CP SYSTEM  Z3Z1P1   2       
> DASD 049E CP SYSTEM  Z3Z1S1   2 
>  
> The '2' at the end  indicates how many systems have the device.
>  
> 47E and 49E are full-pack minidisks defined to MVSDASD which  is not
logged on.
>  
> I have two users XXXX and YYYY that have a INCLUDE MVSLINK  profile. 
Both XXXX 
> and YYYY are MVS systems.
>  
> I have changed the USER DIRECT to comment out 47E and 49E in the 
> PROFILE

> MVSLINK and the USER  MVSDASD. I have done a DIRECTXA USER DIRECT.
>  
> I have tried to detach the devices from XXXX and YYYY. That did not
work.

What do you mean "did not work"?  If you #CP DETACH the mdisks from the 
users, then QUERY DASD Z3Z1P1 and QUERY DASD Z3Z1S1 should show no
linked 
users.  Does it?

Does QUERY SYSTEM 47E and QUERY SYSTEM 49E match your expectations?
 

Alan Altmark
z/VM Development
IBM Endicott

**********************************************************************
This email and any files transmitted with it are confidential and intended 
solely for the use of the individual or entity to whom they are addressed. Any 
unauthorized review, use, disclosure or distribution is prohibited. If you are 
not the intended recipient, please contact the sender by reply e-mail and 
destroy all copies of the original message. 
**********************************************************************

Reply via email to