Sorry, START DASD is not required (but it wouldn't hurt). Maybe you can issue the DEFINE CPOWNED with a DRAINed state, and then START would be required.
2008/4/1, Schuh, Richard <[EMAIL PROTECTED]>: > Following the ATTACH, you need to "START DASD rdev ALL" (or one of the > other equivalent forms of the START command) to tell CP to actually use > the device. > > Regards, > > Richard Schuh > > > > > > -----Original Message----- > > From: The IBM z/VM Operating System > > [mailto:[EMAIL PROTECTED] On Behalf Of Kris Buelens > > Sent: Tuesday, April 01, 2008 9:16 AM > > To: [email protected] > > Subject: Re: Adding temp space > > > > The volser of the new disk must be CP-owned in oder to make > > CP search for its "things": PAGE, SPOOL, Tdisk, DRCT > > > > CP-owned disks are defined in SYSTEM CONFIG. The list can be > > dynamically modified too: > > CP Q CPOWNED to find "reserved" slots > > CP DEFINE CPWONED to fill in a "reserved" slot > > CP ATTACH xxx SYSTEM to make CP search for its "things" > > If there are no reserved slots, an IPL is required. At that > > time, be sure to provide some "reserved" slots for the future. > > > > Beware: > > 1. never change the slot number of the volumes containing > > spool space 2. it is wise to update SYSTEM CONFIG before > > using DEFINE CPOWNED > > (there is always a small change CP abends between the > > dynamic activation and > > the update to SYSTEM CONFIG, and after such an unexpected > > IPL, the spool files on > > the new volume would get lost > > 3. after any update to SYSTEM CONFIG, it is wise to run CPSYNTAX > > > > 2008/4/1, Bauer, Bobby (NIH/CIT) [E] <[EMAIL PROTECTED]>: > > > > > > > > > > > > > > > I'd like to add some temp space to our system. I defined a > > 3390-3 as tdisk using cpfmxta and attached it to the system. > > I can't find any command that will make VM recognize that it > > is there. Anyway to do this short of an IPL? > > > > > > > > > Bobby Bauer > > > Center for Information Technology > > > National Institutes of Health > > > Bethesda, MD 20892-5628 > > > 301-594-7474 > > > > > > > > > > > > > > -- > > Kris Buelens, > > IBM Belgium, VM customer support > > > -- Kris Buelens, IBM Belgium, VM customer support
