In HMC the LOADPARM is empty. OK, I have fixed? it. I have been doing a "load" from the HMC. I did an "Activate" instead and it worked. Subsequently "load" and "activate" are working.
Any insight? Thanks as always. David Anything that is not a mystery is guesswork ________________________________ From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Kris Buelens Sent: Monday, December 14, 2009 11:46 AM To: [email protected] Subject: Re: AUTO IPL You can also enter CONSnnnn in the LOADPARM field, it will also bypass the SAPL screen, but pass CONS=nnnn to CP Example: CONSSYSG starts CP on the "Integrated 3270 console" 2009/12/14 Mike Walter <[email protected]<mailto:[email protected]>> David, What are the arguments on the HMC (or from 1st level when IPLing a 2nd level system) when you IPL? If you DO include an argument "LOADPARM dev_addr", then the SALIPL screen will appear, requiring F10 to load the system. If you DO NOT include the "LOADPARM dev_addr", an IPL should not display the SALIPL screen. Remember that when entering "CP SHUTDOWN REIPL", the loadparms used during the previous IPL are used again (display them with: CP Q IPLPARMS). With CP SHUTDOWN REIPL you can specify many of the parms that are available in SALIPL. Mike Walter Hewitt Associates "Dean, David (I/S)" <[email protected]<mailto:[email protected]>> Sent by: "The IBM z/VM Operating System" <[email protected]<mailto:[email protected]>> 12/14/2009 10:20 AM Please respond to "The IBM z/VM Operating System" <[email protected]<mailto:[email protected]>> To [email protected]<mailto:[email protected]> cc Subject AUTO IPL UNCLE! I have searched the archives and read the manual?.I know this should be an easy one. My new ZVM 5.4 IPL stops at the SAPL screen and makes me press F10 to load. This is the existing one that work: Features , auto_ipl , /* No prompt at IPL */ cold , /* perform cold start */ drain , Disable , /* Disable the following features */ Set_Privclass , /* Disallow SET PRIVCLASS command */ LogMsg_From_File , /* No LOGMSG from SYSTEM LOGMSG */ Clear_TDisk , /* Don't clear TDisks at IPL time */ Retrieve , /* Retrieve options */ Default 20 , /* Default.... default is 20 */ Maximum 255 , /* Maximum.... default is 255 */ MaxUsers noLimit , /* No limit on number of users */ Passwords_on_Cmds , /* What commands allow passwords? */ Autolog yes , /* ... AUTOLOG does */ Link yes , /* ... LINK does */ Logon yes /* ... and LOGON does, too */ This NO work: requires F10 at SAPL Features , auto_ipl , /* No prompt at IPL */ cold , /* perform cold start */ drain , Disable , /* Disable the following features */ Set_Privclass , /* Disallow SET PRIVCLASS command */ Clear_TDisk , /* Don't clear TDisks at IPL time */ Retrieve , /* Retrieve options */ Default 20 , /* Default.... default is 20 */ Maximum 255 , /* Maximum.... default is 255 */ MaxUsers noLimit , /* No limit on number of users */ Passwords_on_Cmds , /* What commands allow passwords? */ Autolog yes , /* ... AUTOLOG does */ Link yes , /* ... LINK does */ Logon yes /* ... and LOGON does, too */ David M. Dean Information Systems BlueCross BlueShield Tennnessee ----------------------------------------------------- Please see the following link for the BlueCross BlueShield of Tennessee E-mail disclaimer: http://www.bcbst.com/email_disclaimer.shtm The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail. -- Kris Buelens, IBM Belgium, VM customer support ----------------------------------------------------- Please see the following link for the BlueCross BlueShield of Tennessee E-mail disclaimer: http://www.bcbst.com/email_disclaimer.shtm
