Our 3584 is attached using Ficon, and yes, we use DFSMS/VM RMS to interface between the tape library and VM:Tape. Can't say about FC, I've never worked with it.
Peter -----Original Message----- From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Barbara Andrews Sent: January 29, 2010 13:34 To: [email protected] Subject: Re: 3584 support in vm tape manager software Is your 3584 attached to VM FC or Ficon? From the other response I received from this post "If the 3584 Tape Library is managed by DFSMS/VM RMS on z/VM, then CA VM:Tape will interface with it via DFSMS/VM RMS" and the following statement I found in an IBM Tape Manager manual "An automated tape library is supported by Tape Manager only if it is supported by RMS.", it sounds like no matter which tape manager product we use, the dependency is on what DFSMS/VM RMS on z/VM supports. So my additional question is.... Does anyone out there know if it is possible to use a tape library that is attached via FC with DFSMS/VM RMS on z/VM? The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review retransmission dissemination or other use of or taking any action in reliance upon this information by persons or entities other than the intended recipient or delegate is strictly prohibited. If you received this in error please contact the sender and delete the material from any computer. The integrity and security of this message cannot be guaranteed on the Internet. The sender accepts no liability for the content of this e-mail or for the consequences of any actions taken on the basis of information provided. The recipient should check this e-mail and any attachments for the presence of viruses. The sender accepts no liability for any damage caused by any virus transmitted by this e-mail. This disclaimer is property of the TTC and must not be altered or circumvented in any manner.
