It got errors that the devices were already attached to DTCVSW1.
So I detached them manually and re-executed the SET VSWITCH command
again, and now we have
q vswitch
VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 12 Maxconn: INFINITE
PERSISTENT RESTRICTED NONROUTER Accounting: OFF
VLAN Unaware
MAC address: 02-00-00-00-00-01
State: Initialization in progress
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF
RDEV: 0800.P00 Controller: NONE
RDEV: 0810.P00 Controller: NONE
RDEV: 0860.P00 Controller: NONE
VSWITCH SYSTEM VSWITCH2 Type: VSWITCH Connected: 0 Maxconn: INFINITE
PERSISTENT RESTRICTED NONROUTER Accounting: OFF
VLAN Unaware
MAC address: 02-00-00-00-00-02
State: Initialization in progress
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF
RDEV: 0803.P00 Controller: NONE Error: Detached
RDEV: 0813.P00 Controller: NONE Error: Path severed
RDEV: 0863.P00 Controller: NONE Error: Path severed
At least no errors but it still isn't working. "Initialization in
progress"
________________________________
From: The IBM z/VM Operating System [mailto:[email protected]] On
Behalf Of Mark Pace
Sent: Friday, July 02, 2010 3:24 PM
To: [email protected]
Subject: Re: Speaking of VSWITCHES
Try
SET VSWITCH VSWITCH1 CONNECT
On Fri, Jul 2, 2010 at 4:22 PM, McBride, Catherine <[email protected]>
wrote:
Somebody rebooted the switch that our OSA cards are plugged
into. Our VSWITCH tried to recover by failing over from VSWITCH1 to
VSWITCH2. Unfortunately, both of them terminate at the same physical
switch and now we can't get either one to activate. Output of Q VSWITCH
looks like this:
q vswitch
VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 12 Maxconn:
INFINITE
PERSISTENT RESTRICTED NONROUTER
Accounting: OFF
VLAN Unaware
MAC address: 02-00-00-00-00-01
State: Initialization in progress
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF
RDEV: 0800.P00 Controller: NONE Error:
Detached
RDEV: 0810.P00 Controller: NONE Error: Path
severed
RDEV: 0860.P00 Controller: NONE Error: Path
severed
VSWITCH SYSTEM VSWITCH2 Type: VSWITCH Connected: 0 Maxconn:
INFINITE
PERSISTENT RESTRICTED NONROUTER
Accounting: OFF
VLAN Unaware
MAC address: 02-00-00-00-00-02
State: Initialization in progress
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF
RDEV: 0803.P00 Controller: NONE Error:
Detached
RDEV: 0813.P00 Controller: NONE Error: Path
severed
RDEV: 0863.P00 Controller: NONE Error: Path
severed
I've tried attaching the RDEV's to DTCSW1 and DTCSW2, and
autologged both of these as well.
Queries of the RDEVS show the following:
OSA 0800 ATTACHED TO DTCVSW1 0800 DEVTYPE OSA CHPID F0
OSD
Ready; T=0.01/0.01 15:13:52
q 810
OSA 0810 ATTACHED TO DTCVSW1 0810 DEVTYPE OSA CHPID F1
OSD
Ready; T=0.01/0.01 15:13:55
q 860
OSA 0860 ATTACHED TO DTCVSW1 0860 DEVTYPE OSA CHPID F2
OSD
Ready; T=0.01/0.01 15:14:01
The CHPIDS are online. We even popped the cover and looked at
the blinking lights on the cards.
DTCVSW1, DTCVSW2, and TCPIP are all logged on and active.
I've tried varying off and varying on the devices, RESET, READY,
etc.
Any suggestions late on a Friday afternoon?
--
Mark Pace
Mainline Information Systems
1700 Summit Lake Drive
Tallahassee, FL. 32317
