Marcy and Mark, THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! We're going again!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-----Original Message----- From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Marcy Cortes Sent: Friday, July 02, 2010 3:43 PM To: [email protected] Subject: Re: Speaking of VSWITCHES Right - from all LPARs that have it. That will cause the microcode on it to be reloaded and is your last big stick. If that doesn't work, you beat on the switch people until they tell you what change they put in that they must now back off :) And then have them provide some switch redundancy! Marcy ________________________________ From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Mark Pace Sent: Friday, July 02, 2010 1:40 PM To: [email protected] Subject: Re: [IBMVM] Speaking of VSWITCHES I wouldn't think would have to reset the OSA, but if the disconnect and connect do not work I would try varying off/on the CHPID. On Fri, Jul 2, 2010 at 4:36 PM, Marcy Cortes <[email protected]> wrote: How about set vswitch xx disconnect and then set vswitch xx connect ? ________________________________ From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of McBride, Catherine Sent: Friday, July 02, 2010 1:35 PM To: [email protected] Subject: Re: [IBMVM] Speaking of VSWITCHES It got errors that the devices were already attached to DTCVSW1. So I detached them manually and re-executed the SET VSWITCH command again, and now we have q vswitch VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 12 Maxconn: INFINITE PERSISTENT RESTRICTED NONROUTER Accounting: OFF VLAN Unaware MAC address: 02-00-00-00-00-01 State: Initialization in progress IPTimeout: 5 QueueStorage: 8 Isolation Status: OFF RDEV: 0800.P00 Controller: NONE RDEV: 0810.P00 Controller: NONE RDEV: 0860.P00 Controller: NONE VSWITCH SYSTEM VSWITCH2 Type: VSWITCH Connected: 0 Maxconn: INFINITE PERSISTENT RESTRICTED NONROUTER Accounting: OFF VLAN Unaware MAC address: 02-00-00-00-00-02 State: Initialization in progress IPTimeout: 5 QueueStorage: 8 Isolation Status: OFF RDEV: 0803.P00 Controller: NONE Error: Detached RDEV: 0813.P00 Controller: NONE Error: Path severed RDEV: 0863.P00 Controller: NONE Error: Path severed At least no errors but it still isn't working. "Initialization in progress" ________________________________ From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Mark Pace Sent: Friday, July 02, 2010 3:24 PM To: [email protected] Subject: Re: Speaking of VSWITCHES Try SET VSWITCH VSWITCH1 CONNECT On Fri, Jul 2, 2010 at 4:22 PM, McBride, Catherine <[email protected]> wrote: Somebody rebooted the switch that our OSA cards are plugged into. Our VSWITCH tried to recover by failing over from VSWITCH1 to VSWITCH2. Unfortunately, both of them terminate at the same physical switch and now we can't get either one to activate. Output of Q VSWITCH looks like this: q vswitch VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 12 Maxconn: INFINITE PERSISTENT RESTRICTED NONROUTER Accounting: OFF VLAN Unaware MAC address: 02-00-00-00-00-01 State: Initialization in progress IPTimeout: 5 QueueStorage: 8 Isolation Status: OFF RDEV: 0800.P00 Controller: NONE Error: Detached RDEV: 0810.P00 Controller: NONE Error: Path severed RDEV: 0860.P00 Controller: NONE Error: Path severed VSWITCH SYSTEM VSWITCH2 Type: VSWITCH Connected: 0 Maxconn: INFINITE PERSISTENT RESTRICTED NONROUTER Accounting: OFF VLAN Unaware MAC address: 02-00-00-00-00-02 State: Initialization in progress IPTimeout: 5 QueueStorage: 8 Isolation Status: OFF RDEV: 0803.P00 Controller: NONE Error: Detached RDEV: 0813.P00 Controller: NONE Error: Path severed RDEV: 0863.P00 Controller: NONE Error: Path severed I've tried attaching the RDEV's to DTCSW1 and DTCSW2, and autologged both of these as well. Queries of the RDEVS show the following: OSA 0800 ATTACHED TO DTCVSW1 0800 DEVTYPE OSA CHPID F0 OSD Ready; T=0.01/0.01 15:13:52 q 810 OSA 0810 ATTACHED TO DTCVSW1 0810 DEVTYPE OSA CHPID F1 OSD Ready; T=0.01/0.01 15:13:55 q 860 OSA 0860 ATTACHED TO DTCVSW1 0860 DEVTYPE OSA CHPID F2 OSD Ready; T=0.01/0.01 15:14:01 The CHPIDS are online. We even popped the cover and looked at the blinking lights on the cards. DTCVSW1, DTCVSW2, and TCPIP are all logged on and active. I've tried varying off and varying on the devices, RESET, READY, etc. Any suggestions late on a Friday afternoon? -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317
