I actually have a 191 disk assigned for my 2nd level VM and IPL CMS with
an AUTOEXEC:
/* */
Trace "O"
Address "COMMAND"
nl="15"x
"CP SET RUN ON"
Cmd="CP TERM CONMODE 3270"nl||,
"CP IPL 06F8 CLEAR LOADPARM 0009"
Queue Cmd
Exit
Frank M. Ramaekers Jr.
________________________________
From: The IBM z/VM Operating System [mailto:[email protected]] On
Behalf Of George Henke/NYLIC
Sent: Tuesday, October 05, 2010 2:28 PM
To: [email protected]
Subject: IPL VM/VM Issues
L2 is a cloned L1 directory except for the volsers in the Directory and
CF Parm files which have all been made unique, ie 540 becoming 54X.
I plan to ipl as follows:
system reset
term conmode 3270
set mach esa
I 125b clear loadparm 009
START COLD DRAIN
To be safe, I suppose I should also add NOAUTO.
L1 runs 5 z/OS machines and 3 Linuxes.
They could be corrupted at L1 if I tried to bring them up in L2 at the
same time without GRS, MIM, or some other serialization product.
I doubt TCPIP will work at L2 without some reconfiguring.
So I should define some GRAFs and dial them.
Not sure if my L2 entry in the L1 Directory needs 54XRES, 54XPAG,
54XSPL, 54XW01, 54XW02 or whether I can just specify the IPL vplume,
54XRES, and CP finds the rest from the Parm disk.
_____________________________________________________
This message contains information which is privileged and confidential and is
solely for the use of the
intended recipient. If you are not the intended recipient, be aware that any
review, disclosure,
copying, distribution, or use of the contents of this message is strictly
prohibited. If you have
received this in error, please destroy it immediately and notify us at
[email protected].
