My point is that you can use a real terminal (if you have one of these) or a port on the ICC (if you have that) instead of the HMC.
Frank M. Ramaekers Jr. -----Original Message----- From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Michael Coffin Sent: Monday, October 18, 2010 2:35 PM To: [email protected] Subject: Re: ICKSADSF Parms Hi Frank, 2nd level on a running system I have no problems with, but on a real HMC with the 3270 emulator addressed as SYSG it doesn't work. -Mike -----Original Message----- From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Frank M. Ramaekers Sent: Monday, October 18, 2010 2:35 PM To: [email protected] Subject: Re: ICKSADSF Parms I tried it successfully by specifying: 1) Load module of ICKSADSF 2) IPL Parameters of CONS0009 Running 2nd level with the console at 0009. Frank M. Ramaekers Jr. -----Original Message----- From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Michael Coffin Sent: Monday, October 18, 2010 1:32 PM To: [email protected] Subject: Re: ICKSADSF Parms Hi Bruce, Thanks. I tried CNSLSYSG but no luck with that either. Pressing "ENTER" to get the attention of DSF is likewise "not easy". When PF10 is pressed to LOAD, that causes the X WAIT status on SYSG. ENTER can't be pressed until SYSG is ready for input. I tried pressing RESET then CLEAR, and RESET then ENTER - but neither yielded the DSF startup messages. :( -Mike -----Original Message----- From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Bruce Hayden Sent: Monday, October 18, 2010 1:58 PM To: [email protected] Subject: Re: ICKSADSF Parms I think you want CNSLSYSG. ("CNSL" must be the first 4 chars of the loadparm.) On Mon, Oct 18, 2010 at 12:25 PM, Michael Coffin <[email protected]> wrote: > Hi Folks, > > > > I've never had an occasion to use ICKSADSF from SALIPL until now (I have a > clone of my system with NO PAGE or SPOL, so it crashes right after IPL), so > I need to allocate a couple of packs. No big deal, I'll use the handy-dandy > ICKSADSF - but whenever I try to use it the load just "stalls". I imagine > it can't find the SYSG console, what is the parm to tell it to use SYSG? > I've tried just "SYSG" and "CONS=SYSG" in the IPL PARMS but neither of those > work. > > > > PS: Is LOAD ORIGIN 1000 OK for ICKSADSF? > > > > -Mike -- Bruce Hayden z/VM and Linux on System z ATS IBM, Endicott, NY _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at [email protected]. _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at [email protected].
