ty, Kris, I am trying to setup RSF (Remote Support Facility) fot our new 
z/196 coming in soon and need to make one of the HMC adapters available to 
the IBM Support System via the internet.




Kris Buelens <[email protected]> 
Sent by: The IBM z/VM Operating System <[email protected]>
01/19/2011 10:56 AM
Please respond to
The IBM z/VM Operating System <[email protected]>


To
[email protected]
cc

Subject
Re: Support Element (SE) vs HMC and IP Addresses






My recent experience also shows that you need to obey the design:
- there is a private network between the HMC and both SEs
- it must not be part of your own LAN to get remote access to the HMC.
I had a case that was not set up well: there was only one LAN.  After 
applying some maintenance to the HMC and/or SEs, many things stopped 
working.

2011/1/19 Frank M. Ramaekers <[email protected]>
Each SE has an IP address (I think the zSeries has always had two SE’s).
 
 

Frank M. Ramaekers Jr.
 
 

From: The IBM z/VM Operating System [mailto:[email protected]] On 
Behalf Of George Henke/NYLIC
Sent: Wednesday, January 19, 2011 9:14 AM

To: [email protected]
Subject: Re: Support Element (SE) vs HMC and IP Addresses
 
ty, Mark, this is very helpful. 

Does an SE have more than 1 IP address as well? 



Mark Pace <[email protected]> 
Sent by: The IBM z/VM Operating System <[email protected]> 
01/19/2011 10:03 AM 


Please respond to
The IBM z/VM Operating System <[email protected]>



To
[email protected] 
cc
 
Subject
Re: Support Element (SE) vs HMC and IP Addresses
 


 
 




The SEs each have an IP address, and the HMC has an IP address on their 
own private network.  The HMC may also have another NIC that can be 
connected to another network, say to reach the outside world, or allow you 
to access from your own private network.

On Wed, Jan 19, 2011 at 10:00 AM, George Henke/NYLIC <
[email protected]> wrote: 
HMC emulates an SE, but does it have separate IP addresses, separate 
interfaces, or are they the same as the SE? 

Does the SE have IP addresses or are they only for the HMC? 



-- 
Mark D Pace  
Senior Systems Engineer  
Mainline Information Systems  



_____________________________________________________ This message 
contains information which is privileged and confidential and is solely 
for the use of the intended recipient. If you are not the intended 
recipient, be aware that any review, disclosure, copying, distribution, or 
use of the contents of this message is strictly prohibited. If you have 
received this in error, please destroy it immediately and notify us at 
[email protected]. 



-- 
Kris Buelens,
IBM Belgium, VM customer support

Reply via email to