I just set this up a few months ago. It is very easy to do. This is the manual I used :
http://www-01.ibm.com/support/docview.wss?uid=isg2ac9716b1992e4e0b85257554005ca806 <http://www-01.ibm.com/support/docview.wss?uid=isg2ac9716b1992e4e0b85257554005ca806&aid=1> &aid=1 Aria From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of George Henke/NYLIC Sent: Wednesday, January 19, 2011 10:59 AM To: [email protected] Subject: Re: Support Element (SE) vs HMC and IP Addresses ty, Kris, I am trying to setup RSF (Remote Support Facility) fot our new z/196 coming in soon and need to make one of the HMC adapters available to the IBM Support System via the internet. Kris Buelens <[email protected]> Sent by: The IBM z/VM Operating System <[email protected]> 01/19/2011 10:56 AM Please respond to The IBM z/VM Operating System <[email protected]> To [email protected] cc Subject Re: Support Element (SE) vs HMC and IP Addresses My recent experience also shows that you need to obey the design: - there is a private network between the HMC and both SEs - it must not be part of your own LAN to get remote access to the HMC. I had a case that was not set up well: there was only one LAN. After applying some maintenance to the HMC and/or SEs, many things stopped working. 2011/1/19 Frank M. Ramaekers <[email protected]> Each SE has an IP address (I think the zSeries has always had two SE’s). Frank M. Ramaekers Jr. _____ From: The IBM z/VM Operating System [mailto: <mailto:[email protected]> [email protected]] On Behalf Of George Henke/NYLIC Sent: Wednesday, January 19, 2011 9:14 AM To: <mailto:[email protected]> [email protected] Subject: Re: Support Element (SE) vs HMC and IP Addresses ty, Mark, this is very helpful. Does an SE have more than 1 IP address as well? Mark Pace < <mailto:[email protected]> [email protected]> Sent by: The IBM z/VM Operating System < <mailto:[email protected]> [email protected]> 01/19/2011 10:03 AM Please respond to The IBM z/VM Operating System < <mailto:[email protected]> [email protected]> To <mailto:[email protected]> [email protected] cc Subject Re: Support Element (SE) vs HMC and IP Addresses The SEs each have an IP address, and the HMC has an IP address on their own private network. The HMC may also have another NIC that can be connected to another network, say to reach the outside world, or allow you to access from your own private network. On Wed, Jan 19, 2011 at 10:00 AM, George Henke/NYLIC <[email protected]> wrote: HMC emulates an SE, but does it have separate IP addresses, separate interfaces, or are they the same as the SE? Does the SE have IP addresses or are they only for the HMC? -- Mark D Pace Senior Systems Engineer Mainline Information Systems _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at [email protected]. -- Kris Buelens, IBM Belgium, VM customer support
