Peter and Clyde, Thanks for the votes of confidence, but I can't quite agree. There are lots of holes in my knowlege. But I always try to balance "doing it right" with practicality.
I learned from people whom I consider to truly be experts and good craftsmen. San Francisco Bay beats the crap out of boats' rigging hulls and engines, and if a boatyard takes shortcuts here, it comes back to bite them. We sail in "fresh gale" conditions every day in the summer. I've learned alot from books and from folks like: Rigger Brion Toss; Rigger and solo-world-racer Bruce Schwab; and various people at Svendsen's Boat Yard like Bill Frick (fiberglass), Wilson (fine joinery and various stuff) , Ray; Cree at Berkeley Marine Center, Arne Jonnson (amazing custom boatbuilder ) and his son Joakim (who passed away a year or two ago), and others whose names I forget .... and I read the ABYC codes when I need to know who to do something safely... and I have occassionally asked advice from local NA's like Jim Antrim and Tom Wylie... and don't forget the tech support folks at West Systems who graciously answer my questions. Those guys are REAL experts! I'm just a wanna be. Fair winds, Judy B 1977 C27 TR Bijou. ________________________________ From: "[email protected]" <[email protected]> To: [email protected] Sent: Monday, May 11, 2009 8:26:42 AM Subject: Re: [IC27A] Re: Source of the Catalina smile. Judy I'm with Clyde on this. I'm a degreed Nav Arch, my dad is a licensed surveyor, and we both got our PE licenses (somewhat late in life), but every time I have a question about the Catalina your site is the first place I check, and anything I've adopted, dad has concurred. So 2 votes for expert. Peter B Zahn, PE #2622 SNAGGLEPUSS STD / Dinette/ OB/ Tilller -----Original Message----- From: Clyde Thorington <cthor...@att. net> To: ic...@yahoogroups. com Sent: Sun, 10 May 2009 9:35 pm Subject: Re: [IC27A] Re: Source of the Catalina smile. Judy - I take exception to your comment "I am no expert." If you are not you are really close to it. Have been on and reading C27 and C3l0 lists for over about fourteen years and your reasoned well thought out comments plus all the great well planned work you have done on your C27 put yo u right up there. Keep up the great work. Clyde Thorington ex C27 now C30 San Jose, CA . --- On Sun, 5/10/09, Judith Blumhorst, DC <drju...@blumhorst. com> wrote: From: Judith Blumhorst, DC <drju...@blumhorst. com> Subject: Re: [IC27A] Re: Source of the Catalina smile. To: ic...@yahoogroups. com Date: Sunday, May 10, 2009, 12:45 PM The bilge in my boat sometimes has a little water. I wouldn't worry about it unless you see a lot of rust. My '77 has new(ish) SS bolts and the bilge isn't perfectly dry. the bolts look fine. Here's my advice (and I'm not an expert by any means): If there's no crack, there's no stagnant water getting at the bolts. As long as the water isn't deep, there's oxygen in it. The SS bolts should last a couple of decades. I personally wouldn't encase them in huge blobs of epoxy. You'd never get the nuts off for inspection. &n bsp; As far as I'm aware of, maintenance consists of periodically removing the nuts (one at a time) and inspecting the bottom of the bolt for signs of corrosion. Then reinstall new washers and nuts, retorque to spec, and seal with a dollop of epoxy or polysulfide caulk or Sikaflex 291 LOT(after coating the nut and bolt top with releasing agent so you can get it off in a year or two to re-inspect) Also, perform a "sounding" of the bolts by striking them with a metal hammer. Good bolts have a ringing sound. A rusted out bolt will have a "dead" sound. It's not perfectly reliable, but it may clue you in about the invisible part of the bolt. Hope this helps. I'm not an expert like the folks at Svendson's boat works, but that's what I've learned hanging around there for more than a decade. Fair winds, Judy B SF Bay, CA http://www.blumhorst.com/catalina27/catalinahomepage.htm ________________________________ From: Joe McCary <j...@photoresponse. com> To: ic...@yahoogroups. com Sent: Sunday, May 10, 2009 11:21:54 AM Subject: RE: [IC27A] Re: Source of the Catalina smile. OK, so I have a related question. My bilge is NEVER dry. It always has a little dirty water in it. The pump’s “float switch in not a float, but instead an electronic sensor that turns on the pump. But the pump runs until it’s water intake is dry but there is still a little water in the bilge. Obviously this covers the bottom of the bulge and the SS bolts (she is an ’81) are covered. What should I do? I could completely empty the bilge and pour in some more glass to raise the bottom to a level past the nuts and make a sump depression for then pump to draw from. But is that necessary? This year when I pulled the boat I had NO smile. It has been in the water for at least 2½ years. Joe McCary Aeolus II, West River, MD joe at photoresponse. co m www.aeoluswestriver .net __________ Information from ESET NOD32 Antivirus, version of virus signature database 4063 (20090508) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset. com ________________________________ We found the real 'Hotel California' and the 'Seinfeld' diner. What will you find? Explore WhereItsAt.com.
