--- In [email protected], <dbat...@...> wrote: >Garelick was probably the manufacturer. They are still in business and >probably have what you are looking for. We used one on my Tanzer and it worked >great.
Joe Keogh Branwyn, #5465 > Hi, > > The mounts (smb-2 ss) are the same idea as mine. The mounts on my boat have > round openings, not square. The ladder in the link you sent won't work. The > one I'm looking for is usually 2 step, often made of wood. It just drops > onto the keyhole mounts which are located on the hull, not the deck. > > Thanks > Denis- > ---- Richard and Judy Bell <randj...@...> wrote: > > ============= > Are you looking for something like this? > > > > http://www.mengo-ind.com/DisplaySection.aspx?which=73 > > > > The mounts look like the keyholes on this page: > > > > http://www.mengo-ind.com/DisplayDetail.aspx?which=174 > > > > > > Here is a folding one that wouldn't take up much room for storage. > > > > http://www.defender.com/product.jsp?path=-1|10391|109363|824301 > <http://www.defender.com/product.jsp?path=-1|10391|109363|824301&id=35232> > &id=35232 > > > > at www.defender.com <http://www.defender.com/> search for deck > mount ladder and you will see folding, non-folding and several > choices for number of steps. > > > > > > Richard > > > > _____ > > From: [email protected] [mailto:[email protected]] On Behalf Of > dbat...@... > Sent: Saturday, June 20, 2009 5:32 PM > To: [email protected] > Subject: [IC27A] boarding ladder > > > > > > > > > Hello, > > Like most, I have a folding swim ladder on the transom with a full height > pushpit and backstay right down the middle. I also have, from a previous > owner two keyhole mounts just below the stbd winch. Unfortunately the PO > took the ladder with him. The ladder in this spot is a lot easier to use > than the transom mounted one. I have looked for a replacement ladder but > cannot locate one. They were quite popular a few years ago, but apparently > no more. I tried the main line boat shops and consignment shops. Any ideas > > Thanks, > Denis- >
