Derek I have a Universal 15 diesel and I also have the normal vibration (new cutlass bearing) and it varies depending on RPMs. The prop wash is normal. You really can feel a difference in the absence of prop wash if you take the tiller of a C27 that has an outboard. John Jennings C27 #5267 Barjoh In a message dated 7/29/2009 10:18:43 A.M. Eastern Daylight Time, [email protected] writes: Being new to an Atomic 4 and a c27 I was looking for a little feedback on how these two work together. I do notice that when I am under power I do get some vibration in the boat, its not excessive - but not sure if this should be 100% smooth. When I bought the boat the cutlass bearing had a very small amount of play in it. I figured I would replace it next season and align the engine.
I also notice a fair amount of prop wash in the rudder while under power - is this normal? Any other observations or things to check? Thanks Derek.- 79 c27 #4297 Selene **************Hot Deals at Dell on Popular Laptops perfect for Back to School (http://pr.atwola.com/promoclk/100126575x1223106546x1201717234/aol?redir=http:%2F%2Faltfarm.mediaplex.com%2Fad%2Fck%2F12309%2D81939%2D1629%2D8) [Non-text portions of this message have been removed]
