You could probably sleeve the boom and put the two piece back together. Or try visiting a few of the lower end boat yards, they usually have old rigs sitting around. You could probably find something that is close or shorten a larger boom.
We had something similar happen in this area, someone stole the aluminum bleachers from a high school stadium. ~Dan --- On Sat, 3/13/10, ChefYaz <[email protected]> wrote: From: ChefYaz <[email protected]> Subject: RE: [IC27A] boom mount To: [email protected] Date: Saturday, March 13, 2010, 5:28 PM I have a complete boom if your interested. Sorry, no pole. Feel free to contact me “off list” if you’re interested. chef...@cox. net Mark, Gratis (6115) NOLA From: ic...@yahoogroups. com [mailto:IC27A@ yahoogroups. com] On Behalf Of davidbergren Sent: Saturday, March 13, 2010 4:13 PM To: ic...@yahoogroups. com Subject: [IC27A] boom mount I'm a newbie to this group. Have enjoyed my '74 C-27 for many years. A thief recently stole my boom & spinniker pole, cut them in two, stripped off the hardware and sold them for scrap (along with a poop stick). I actually tracked them down at a salvage yard and recovered them. (Was unusual enough in Sacramento CA so the folks recalled the sale) My question: My boom is oval shaped, I need the aft end plate and the boom mount or goose neck. Does any one have either available for sale? Also, anyone have thoughts on whether I can get the boom properly welded together? I think the spinniker pole won't be a problem. Thanks. DB
