The IESG has approved the following document:
- 'MPLS Network Actions for Network Resource Partition Selector'
  (draft-ietf-mpls-mna-nrp-selector-07.txt) as Proposed Standard

This document is the product of the Multiprotocol Label Switching Working
Group.

The IESG contact persons are Gunter Van de Velde, Jim Guichard and Ketan
Talaulikar.

A URL of this Internet-Draft is:
https://datatracker.ietf.org/doc/draft-ietf-mpls-mna-nrp-selector/




Technical Summary

   An IETF Network Slice service provides connectivity coupled with a
   set of network resource commitments and is expressed in terms of one
   or more connectivity constructs.  A Network Resource Partition (NRP)
   is a collection of resources identified in the underlay network to
   support IETF Network Slice services.  A Slice-Flow Aggregate refers
   to the set of traffic streams from one or more connectivity
   constructs belonging to one or more IETF Network Slices that are
   mapped to a specific NRP and provide the same forwarding treatment.
   The packets associated with a Slice-Flow Aggregate may carry a
   marking in the packet's network layer header to identify this
   association and this marking is referred to as NRP Selector.  The NRP
   Selector is used to map the packet to the associated NRP and provide
   the corresponding forwarding treatment to the packet.

   MPLS Network Actions (MNA) technologies are used to indicate actions
   for Label Switched Paths (LSPs) and/or MPLS packets and to transfer
   data needed for these actions.  This document discusses options for
   using MPLS Network Actions (MNAs) to carry the NRP Selector in MPLS
   packets.

Working Group Summary

   Particularly rough consensus as outlined in the shepherd report. Details of 
contentious points listed in the report. 

Document Quality
  
   There are no known implementations.

Personnel

   The Document Shepherd for this document is Adrian Farrel. The
   Responsible Area Director is Jim Guichard.



_______________________________________________
IETF-Announce mailing list -- [email protected]
To unsubscribe send an email to [email protected]

Reply via email to